NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
16 GB DDR4 ECC SODIMM at 3200 MHz with CL22 latency and 1.2 V for microserver and workstation upgrades
This 16GB DDR4 module runs at 3200MHz with CL22 latency and 1.2V operation. It uses a 260-pin SO-DIMM form factor and includes ECC error correction for data integrity. The unbuffered design suits compatible microserver, server and workstation laptops. It replaces the Hynix HMAA2GS7CJR8N-XN part directly.
Buyers needing ECC DDR4 SO-DIMM memory for supported microserver or workstation laptops can use this module. Systems that require registered or buffered memory cannot accept this unbuffered stick. Laptops limited to non-ECC memory will not utilise the error-correction feature. Buyers who need capacities beyond 16GB must look elsewhere.
The single decisive specification is the 16GB DDR4 3200MHz CL22 ECC unbuffered SO-DIMM configuration. Your system must accept DDR4 SO-DIMM modules with ECC and unbuffered operation at this speed and latency. Verify the motherboard or laptop manual for supported memory specifications before purchase.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix |
| Model | HMAA2GS7CJR8N-XN |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | HMAA2GS7CJR8N-XN |
| Recommend Use | Compatible Replacement for Hynix HMAA2GS7CJR8N-XN |
Yes, the module uses the standard 260-pin DDR4 SO-DIMM form factor, so the system must provide a matching slot.
Mixing ECC and non-ECC modules is not recommended; the system will typically disable ECC or fail to boot.
Check the memory speed and latency in the BIOS or with a system-information tool such as CPU-Z to verify 3200 MT/s and CL22 timings.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?