Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with black memory chips, no heat spreader, 262-pin SODIMM form factor

A-Tech

A-Tech 16GB DDR5 4800 ECC SODIMM server RAM

SKU CH-3AK2-P5QDG

16 GB DDR5 4800 ECC SODIMM module with 1Rx8 organisation for microserver and workstation upgrades

  • Capacity16GB
  • Type262-Pin DDR5 SO-DIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes
  • 16 GB DDR5-4800 ECC SODIMM expands server memory capacity
  • ECC unbuffered design protects data integrity in critical workloads
  • 1 V DDR5 standard voltage reduces power draw per module
  • 262-pin SO-DIMM form factor fits microserver and workstation slots
  • 1Rx8 rank with CL40 timing delivers stable 38400 MT/s throughput

16GB DDR5 ECC SODIMM for Microservers

This 16GB DDR5 4800 ECC SODIMM is built for microserver, server and workstation systems that require error-correcting memory in the 262-pin SO-DIMM form factor. It runs at 4800 MT/s with a CAS latency of 40 and operates at the standard 1.1V DDR5 voltage. The unbuffered 1Rx8 module uses major-brand DRAM ICs and is a direct replacement for the Kingston KTL-TN548T-16G part.

Replaces non-ECC or slower DDR5 SODIMMs

If your system currently uses non-ECC DDR5 SODIMMs or lower-speed ECC modules, this upgrade adds data-integrity protection and the full 4800 MT/s bandwidth supported by the platform. The jump is worth it when workloads demand sustained throughput and error correction, such as virtualisation hosts, NAS appliances or database nodes that cannot tolerate silent data corruption.

Suits ECC-capable DDR5 microserver platforms

This module suits builders populating DDR5 microserver or workstation boards that explicitly support unbuffered ECC SODIMMs. It is not for laptops or consumer desktops that lack ECC support in the memory controller, nor for systems requiring registered or load-reduced DIMMs. Buyers needing higher capacity per slot or registered ECC should look at different module types.

Priekšrocības

  • 16 GB DDR5-4800 ECC SODIMM expands server memory capacity
  • ECC unbuffered design protects data integrity in critical workloads
  • 1 V DDR5 standard voltage reduces power draw per module
  • 262-pin SO-DIMM form factor fits microserver and workstation slots
  • 1Rx8 rank with CL40 timing delivers stable 38400 MT/s throughput

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for Kingston KTL-TN548T-16G
ModelA-Tech 16GB DDR5-4800 ECC SODIMM AIO RAM Module
Capacity16GB
Type262-Pin DDR5 SO-DIMM
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Jautājumi par šo preci

Will this 262-pin DDR5 SODIMM fit my microserver slot?

Yes, it uses the standard 262-pin DDR5 SO-DIMM form factor designed for microserver and server memory slots.

What is the correct way to seat this ECC module, and what step is often missed?

Align the notch with the slot key, insert at a slight angle, then press down firmly until both side clips click — the step often missed is verifying both clips fully engage.

When should I expect to replace this 16GB DDR5 4800 ECC SODIMM?

DDR5 memory has no scheduled replacement interval; replace only if memory diagnostics report errors or the module fails to initialise.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.