Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Eight green DDR4 LRDIMM sticks, 288-pin, bare chips, no heat spreader

A-Tech

A-Tech 1TB (8x128GB) DDR4 2933 ECC LRDIMM 2S4Rx4 Server RAM

SKU CH-MT24-0S6Y5

Eight 128 GB DDR4 2933 ECC LRDIMM modules provide 1 TB of load-reduced server memory at CL21 and 1.2 V

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Capacity 1TB (8 x 128GB)

  • 1TB total capacity across eight 128GB modules
  • DDR4 2933 speed rated at PC4-23400 bandwidth
  • ECC Load Reduced DIMM corrects errors for server stability
  • 288-pin DIMM form factor fits DDR4 server slots
  • 20V standard DDR4 voltage for efficient operation

High-capacity server kit

This 1 TB kit contains eight 128 GB DDR4 ECC LRDIMM modules designed for servers and workstations that require registered load-reduced memory. It is not suitable for desktop or laptop computers, which cannot use LRDIMM modules or the octal-rank 3DS/TSV organisation.

Straightforward DIMM installation

Each 288-pin module installs in standard DDR4 DIMM slots following the system manual channel guidelines. The most common issue is attempting to use these modules in consumer boards that lack LRDIMM support, which prevents the system from posting.

DDR4 2933 ECC LRDIMM specification

The modules run at DDR4 2933 (PC4-23400) with CL21 latency at 1.20 V and provide octal-rank x4 3DS/TSV organisation. Verify that your server or workstation specifically supports 128 GB ECC LRDIMM modules before purchase.

Priekšrocības

  • 1TB total capacity across eight 128GB modules
  • DDR4 2933 speed rated at PC4-23400 bandwidth
  • ECC Load Reduced DIMM corrects errors for server stability
  • 288-pin DIMM form factor fits DDR4 server slots
  • 20V standard DDR4 voltage for efficient operation

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 128GB 2S4Rx4 PC4-2933Y-L
Part NumberAT128G8D4D2933LO4N12V
Capacity1TB (8 x 128GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank2S4Rx4 (8Rx4 3DS/TSV)
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How can I confirm the 1TB kit is running at 2933 MHz with CL21 after installation?

Check the BIOS memory settings or a tool like CPU-Z to verify the speed reads 2933 MHz and CAS latency shows 21.

What comes in the box and what must I source separately?

The kit includes eight 128GB DDR4 2933 ECC LRDIMM modules; no cables, brackets or additional hardware are supplied.

Which capacity version should I choose for a server that supports 2S4Rx4 LRDIMMs?

This 1TB kit provides eight 128GB modules in a 2S4Rx4 configuration; select it only if your system qualifies for octal-rank LRDIMMs at 1.2V.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.