Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR4 RDIMMs with gold contacts, 288-pin form factor, 32GB kit

A-Tech

A-Tech 32GB (2x16GB) DDR4 2666 ECC RDIMM 1Rx4 CL19 server RAM

SKU CH-KMKJ-5YFDT

32 GB dual-channel DDR4 ECC RDIMM kit running at 2666 MHz CL19 for servers and workstations

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (2 x 16GB)

  • ECC RDIMM protects data integrity with registered DDR4 2666 MHz modules
  • Dual-channel 32 GB kit (2 × 16 GB) scales server workloads smoothly
  • Single-rank 1Rx4 layout keeps latency low at CL19 timings
  • 2 V DDR4 standard voltage reduces power draw per module
  • 288-pin DIMM form factor fits compatible server and workstation slots

Server memory kit for ECC workloads

This 32 GB dual-channel kit contains two 16 GB DDR4 2666 registered DIMMs with ECC and a CAS latency of CL19. It is built for servers and workstations that require registered memory and will not function in desktop or laptop platforms.

Standard voltage and registered buffering

Each module operates at 1.2 V and uses a 288-pin registered design to reduce electrical load on the memory controller. The single-rank x4 organisation helps maintain signal integrity in multi-DIMM configurations typical of server boards.

Lifetime warranty and US-based support

A-Tech backs the kit with a lifetime warranty and provides complimentary United States-based technical support before, during and after purchase. All modules undergo quality-assurance testing to verify reliable operation in compatible systems.

Priekšrocības

  • ECC RDIMM protects data integrity with registered DDR4 2666 MHz modules
  • Dual-channel 32 GB kit (2 × 16 GB) scales server workloads smoothly
  • Single-rank 1Rx4 layout keeps latency low at CL19 timings
  • 2 V DDR4 standard voltage reduces power draw per module
  • 288-pin DIMM form factor fits compatible server and workstation slots

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 16GB 1Rx4 PC4-2666V-R
Capacity32GB (2 x 16GB)
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install these 288-pin DDR4 RDIMM modules in the correct channels?

Power down the server, open the chassis, and insert each 16 GB module into the DIMM slots specified by the motherboard manual for dual-channel operation; the notch on the 288-pin edge connector keys the module so it can only seat one way.

Will the ECC chips or registered buffer need replacement after a certain period?

The ECC RDIMM uses major-brand DRAM chips and an on-board register; both are solid-state with no moving parts, so no scheduled component replacement is required under normal operating conditions.

At what point does the CL19 latency at 2666 MHz become the bottleneck during sustained workloads?

Under continuous heavy memory traffic the fixed CL19 timing at 2666 MHz sets the minimum access delay, so the CAS latency itself is the first limit encountered before bandwidth saturation.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.