Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Eight green DDR3 ECC UDIMM sticks, 240-pin, silver heat spreaders

A-Tech

A-Tech 32GB (8x4GB) DDR3 1600 ECC UDIMM 2Rx8 1.5V 240-Pin Server RAM

SKU CH-CVWJ-74ZJN

Eight 4 GB DDR3 1600 ECC unbuffered DIMMs totalling 32 GB for servers and workstations

  • Capacity32GB (8 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 32GB (8 x 4GB)

Speed DDR3 1600 (PC3 12800)

  • 32 GB kit expands server capacity for larger workloads
  • DDR3 1600 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • 2Rx8 dual-rank organisation increases memory density per channel
  • 5 V standard voltage ensures broad DDR3 platform compatibility

32GB DDR3 ECC kit for servers

This 32GB kit contains eight 4GB DDR3 1600 ECC UDIMM modules built for server and workstation platforms that require error-correcting unbuffered memory. It is not compatible with standard desktop or laptop computers. Buyers who need memory for consumer motherboards cannot use this kit.

240-pin unbuffered dual-rank modules

Each module uses a 240-pin DIMM form factor with a 2Rx8 dual-rank layout and operates at the standard 1.5V DDR3 voltage. The unbuffered design connects directly to the memory controller without a register, so the system must support ECC UDIMM specifically. Builders whose boards require registered DIMMs cannot install these modules.

DDR3 1600 CL11 interface limits

The kit runs at DDR3 1600 (PC3-12800) with a CAS latency of 11, which defines the maximum throughput and timing envelope of this interface. Systems limited to lower DDR3 speeds will downclock the modules automatically. Workloads that demand higher bandwidth or newer DDR generations must use a different platform.

Priekšrocības

  • 32 GB kit expands server capacity for larger workloads
  • DDR3 1600 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • 2Rx8 dual-rank organisation increases memory density per channel
  • 5 V standard voltage ensures broad DDR3 platform compatibility

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3-12800E
Capacity32GB (8 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What bandwidth does the PC3-12800E DDR3 interface cap at in practice?

The PC3-12800E DDR3 standard caps theoretical bandwidth at 12,800 MB/s per module; real-world throughput is lower due to protocol overhead and system timing.

What physical slot and clearance does this 240-pin DDR3 UDIMM kit require?

Each module uses a standard 240-pin DDR3 DIMM slot; ensure the server or workstation chassis has enough vertical clearance for eight full-height sticks.

How do I install the eight 4 GB modules and what is the common mistake?

Power off, open the chassis, align each module's notch with the slot key, press firmly until the retention clips click; the common mistake is not seating all eight modules fully or ignoring the motherboard's channel population order.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.