NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
32 GB DDR3L 1333 LRDIMM ECC server memory module, 4Rx4 load-reduced design at 1.35 V with 240-pin form factor
This 32 GB DDR3L load-reduced DIMM runs at 1333 MHz with CL9 latency and 1.35 V operation. It carries Supermicro certification for the MEM-DR332L-HL01-LR13 part number and uses Hynix components in a 240-pin form factor. ECC and quad-rank 4Rx4 organisation provide error correction and high density for supported platforms.
Administrators upgrading or repairing qualified Supermicro systems that specifically require 32 GB LRDIMMs at this speed and voltage will find this module a direct match. Builds limited to standard registered DIMMs, lower densities, or different DDR generations cannot use this part.
The 4Rx4 load-reduced layout is mandatory for motherboards designed around this rank structure; systems that only accept single-rank, dual-rank, or standard registered DIMMs will not recognise the module. Verify the platform's qualified-vendor list for MEM-DR332L-HL01-LR13 before purchase.
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR332L-HL01-LR13 |
| Capacity | 32GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Supermicro Certified MEM-DR332L-HL01-LR13 (Hynix) |
The 240-pin LRDIMM edge connector is a passive interface with no moving parts; it does not require scheduled cleaning or replacement under normal server operation.
The DRAM chips are rated for standard JEDEC operating temperatures; sustained full-load use will hit the chip thermal envelope before any voltage-regulator or PCB limit is reached.
The module has no fan and draws only the current needed for the 1.35 V DDR3L interface, so it adds negligible heat and zero acoustic noise to a server chassis.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?