Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 4GB DDR3 1333 ECC UDIMM 2Rx8 1.5V 240-Pin Server Memory

SKU CH-3B4N-BE0MK

4GB DDR3 1333 ECC unbuffered DIMM for servers and workstations, dual-rank 2Rx8 at 1.5V on a 240-pin module

  • Capacity4GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 4GB

Speed DDR3 1333 (PC3 10600)

  • ECC protection guards data integrity in critical server workloads
  • 5 V standard DDR3 voltage ensures broad platform compatibility
  • 1333 MHz DDR3 speed accelerates throughput for demanding applications
  • 240-pin UDIMM form factor fits standard server memory slots
  • Dual-rank 2Rx8 organisation increases memory density per module

A-Tech 4GB DDR3 1333 ECC UDIMM

This module is a 4 GB DDR3 ECC unbuffered DIMM built for servers and workstations that require error-correcting memory. It operates at 1333 MHz with a standard 1.5 V supply and uses a 240-pin form factor.

DDR3 1333 speed and ECC unbuffered limits

The PC3-10600 rating sets a maximum data rate of 1333 MT/s, so the module cannot run faster than the platform’s memory controller allows. ECC unbuffered designs also require a motherboard that supports ECC UDIMMs; registered or fully buffered boards will not accept this module.

2Rx8 dual-rank organisation decides fit

The 2Rx8 dual-rank x8 layout determines how the memory controller addresses the chips. Systems limited to single-rank modules or to a different rank configuration will not recognise the full capacity or may fail to boot.

Priekšrocības

  • ECC protection guards data integrity in critical server workloads
  • 5 V standard DDR3 voltage ensures broad platform compatibility
  • 1333 MHz DDR3 speed accelerates throughput for demanding applications
  • 240-pin UDIMM form factor fits standard server memory slots
  • Dual-rank 2Rx8 organisation increases memory density per module

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3-10600E
Capacity4GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Should I choose the 4GB 2Rx8 DDR3 1333 ECC UDIMM or a different capacity for my server?

This module is a single 4GB stick with a 2Rx8 dual-rank layout. Select it when your system requires ECC unbuffered DDR3 at 1333 MHz and has an open 240-pin DIMM slot.

What does the DDR3 1333 (PC3-10600) speed rating mean once the module is installed?

The memory operates at 1333 MHz with standard 1.5V DDR3 voltage, providing ECC error correction for data integrity in server and workstation workloads.

Is the PC3-10600E interface compatible with my motherboard's memory slots?

The module uses a 240-pin DDR3 DIMM form factor with ECC unbuffered signalling. It fits only DDR3 server or workstation boards that support ECC UDIMM; it will not work in desktop or laptop systems.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.