Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with black memory chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1333 PC3-10600 CL9 1.5V 2Rx8 Kingston KTH9600B/4G KVR1333D3/4GR

SKU CH-BG8E-VTHHW

4GB DDR3 desktop DIMM running at 1333 MHz with CL9 latency and standard 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 4GB capacity expands multitasking headroom for everyday desktop workloads
  • DDR3 1333 MHz speed delivers responsive data throughput at PC3-10600 bandwidth
  • CL9 CAS latency and 1.5V operation ensure stable, standard-compliant timing
  • 240-pin unbuffered DIMM fits mainstream desktop motherboards without ECC overhead
  • Major-brand chipset and full QA testing provide dependable long-term reliability

4GB DDR3 1333 Desktop Memory

A 4 GB DDR3 module rated at 1333 MHz PC3-10600 with CL9 latency and 1.5 V operation. The unbuffered non-ECC DIMM uses major-brand chips and fits standard 240-pin desktop slots. It is built as a direct replacement for Kingston KTH9600B/4G, KVR1333D3/4GR and KVR1333D3N9HK2/8G. Every unit undergoes quality-assurance testing before shipment.

Capacity and headroom

Four gigabytes adds usable workspace for everyday multitasking, office suites and light media consumption on DDR3 platforms. The single-rank 2Rx8 organisation keeps electrical loading low, helping stability on boards with four populated slots. Performance tops out at the rated 1333 MT/s; workloads needing higher bandwidth or more than 4 GB per module will require faster or larger kits.

Kingston cross-reference and testing

The module is validated as a compatible equivalent for three specific Kingston part numbers, simplifying upgrade selection for existing Kingston configurations. Rigorous pre-ship testing targets dependable operation across supported AMD and Intel desktop chipsets. Buyers should still confirm their system's maximum supported speed, voltage and total capacity before installing.

Priekšrocības

  • 4GB capacity expands multitasking headroom for everyday desktop workloads
  • DDR3 1333 MHz speed delivers responsive data throughput at PC3-10600 bandwidth
  • CL9 CAS latency and 1.5V operation ensure stable, standard-compliant timing
  • 240-pin unbuffered DIMM fits mainstream desktop motherboards without ECC overhead
  • Major-brand chipset and full QA testing provide dependable long-term reliability

Specifikācijas

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Jautājumi par šo preci

Will this DDR3 module fit my desktop motherboard?

The module uses the standard 240-pin DIMM form factor for DDR3 desktop memory. Check your motherboard manual to confirm it supports DDR3 and has an available 240-pin slot.

Is this memory compatible with my existing DDR3 RAM?

It runs at 1333 MHz with CL9 latency and 1.5 V. For best stability, match these specifications with your current modules or populate all slots with identical kits.

Does this module support ECC or registered operation?

No, this is a non-ECC unbuffered DIMM designed for standard desktop platforms. It will not work in systems that require ECC or registered memory.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.