Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 4GB DDR3 1333MHz PC3-10600 ECC Registered 2Rx4 240-Pin Server RAM

SKU CH-DFYQ-N8ERQ

4GB DDR3 1333MHz ECC registered server memory module with 240-pin DIMM form factor

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC registered design protects data integrity in server workloads
  • DDR3 1333 MHz PC3-10600 speed matches system bus timing
  • 4 GB capacity on a single 240-pin DIMM adds memory headroom
  • 5 V standard voltage keeps power draw within DDR3 spec
  • 2Rx4 rank organisation fits registered memory slots

4GB DDR3 ECC Registered Module

This 4GB DDR3 1333MHz PC3-10600 ECC Registered DIMM is built for servers and workstations that require registered memory with error correction. It operates at 1.5V with CL9 latency and uses a 2Rx4 organisation on a 240-pin interface.

Suits systems needing registered ECC DDR3

This module fits platforms that specifically call for DDR3 Registered ECC memory at 1333MHz. Systems that require unbuffered memory, non-ECC modules or a different DDR generation cannot use this part.

Registered ECC with 2Rx4 organisation

The single specification that decides compatibility is the registered ECC design with 2Rx4 rank structure; the motherboard must support Registered DIMMs with this exact organisation for the module to function.

Priekšrocības

  • ECC registered design protects data integrity in server workloads
  • DDR3 1333 MHz PC3-10600 speed matches system bus timing
  • 4 GB capacity on a single 240-pin DIMM adds memory headroom
  • 5 V standard voltage keeps power draw within DDR3 spec
  • 2Rx4 rank organisation fits registered memory slots

Specifikācijas

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Jautājumi par šo preci

Does my server need DDR3 1333 MHz PC3-10600 registered ECC slots to use this module?

Yes, the module is a 240-pin DDR3 RDIMM running at 1333 MHz PC3-10600 with ECC and registered buffering, so the motherboard must support that exact specification.

Can I mix this 2Rx4 registered stick with older unbuffered DDR3 DIMMs in the same system?

No, registered and unbuffered DIMMs cannot be mixed on the same motherboard; all slots must use registered modules for the system to operate correctly.

How can I confirm the module is running at 1333 MHz with ECC active after installation?

Check the BIOS memory information or use a tool like CPU-Z to verify the reported speed shows 1333 MHz and that ECC status reads enabled.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.