NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
64 GB DDR4 2133 ECC load-reduced DIMM with CL15 latency and 1.2 V operation for server and workstation upgrades
This 64GB DDR4 module delivers ECC load-reduced reliability for server and workstation platforms. It replaces the Hynix HMAA8GL7MMR4N-TF part number with a tested equivalent built from major-brand chips. The single DIMM adds substantial capacity for virtualisation, database or compute workloads. Compatibility should be verified against the system's qualified vendor list before installation.
Standard 1.2V DDR4 voltage keeps power draw within normal limits for registered server memory. Load-reduced buffering reduces electrical load on the memory controller, helping thermal headroom in densely populated slots. No active cooling is required beyond typical server airflow. The module operates at the rated 2133MHz speed without additional voltage.
This module upgrades systems currently limited by lower-capacity or non-ECC DIMMs that cannot meet data-integrity requirements. The jump is worthwhile when workloads exceed existing memory bandwidth or capacity, causing paging or instability. It is not suited for consumer desktop boards that lack ECC LRDIMM support or for configurations requiring unbuffered UDIMMs.
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Align the notch on the module with the slot key, press firmly until both retention clips click, and ensure the motherboard BIOS is set to the correct 1.2V voltage for DDR4 LRDIMM operation.
No scheduled maintenance is required; ECC error correction handles single-bit errors internally, and the module should only be replaced if the system reports uncorrectable memory errors or fails memory diagnostics.
The CAS latency of CL15 at 2133MHz sets the baseline access delay; under sustained load the memory controller's bandwidth ceiling is reached before thermal throttling becomes a factor at the standard 1.2V operating voltage.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?