Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Single green DDR4 DIMM with black chips and gold contacts

A-Tech

A-Tech 64GB DDR4 2933 ECC RDIMM 2Rx4 1.2V CL21 Server Memory

SKU CH-VV23-GT2Q8

64GB DDR4 2933 ECC RDIMM module with CL21 latency and 1.2V operation for server upgrades

  • Capacity64GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 64 GB capacity expands server memory headroom
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC RDIMM design protects against data corruption
  • 2Rx4 registered layout supports high-density configurations
  • 2 V operation reduces power consumption per module

64GB DDR4 2933 ECC RDIMM Server Module

This is a single 64GB DDR4 2933MHz registered ECC DIMM built for server and workstation platforms. It runs at 1.2V with CL21 latency and uses a 2Rx4 organisation on a 288-pin interface. The module is validated as a direct replacement for the listed HP part numbers.

Buyers needing registered ECC memory

This module suits administrators upgrading or repairing HP systems that require DDR4 2933 registered ECC DIMMs. It will not work in platforms that only accept unbuffered non-ECC memory or that are limited to lower speeds or smaller capacities per slot.

Registered ECC with 2Rx4 organisation

The registered ECC design with 2Rx4 rank structure is the decisive specification; the system memory controller must support registered DIMMs and this rank configuration for the module to function correctly.

Priekšrocības

  • 64 GB capacity expands server memory headroom
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC RDIMM design protects against data corruption
  • 2Rx4 registered layout supports high-density configurations
  • 2 V operation reduces power consumption per module

Specifikācijas

BrandA-Tech
Capacity64GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Jautājumi par šo preci

What motherboard slot does the 288-pin DDR4 RDIMM require?

The module fits a standard DDR4 288-pin DIMM slot on a server or workstation motherboard that supports registered ECC memory.

Will the CL21 2933 MHz module downclock automatically if installed with slower DDR4 RDIMMs?

Yes, the memory will negotiate the lowest common speed and latency across all populated slots, so it runs at the slower modules' rated frequency and timings.

How can I confirm the 64 GB ECC RDIMM is recognised and error-correcting after installation?

Check the system BIOS or UEFI memory information screen; it should show 64 GB at 2933 MHz with ECC status enabled for the new module.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.