Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

A-Tech

A-Tech 8GB (2x4GB) DDR3 1333MHz SODIMM 204-Pin CL9 laptop RAM

SKU CH-M9GJ-E8Y76

Dual-channel 8 GB kit of DDR3 1333 MHz 204-pin SODIMM modules for laptop memory upgrades

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • ECCNo
  • Buffered/RegisteredUnbuffered

CAS Latency CL9

  • 8GB dual-channel kit improves multitasking with two matched 4GB modules
  • DDR3 1333MHz CL9 speed accelerates everyday workloads
  • 204-pin SODIMM form factor fits compatible laptops and all-in-ones
  • Non-ECC unbuffered design ensures broad system compatibility
  • Rigorously tested modules deliver reliable long-term performance

8GB DDR3 1333MHz Dual-Channel Kit

This A-Tech kit supplies 8GB of DDR3 laptop memory as two matched 4GB SO-DIMMs. Rated at 1333MHz with CL9 latency, the modules are non-ECC, unbuffered and built to the 204-pin standard used in compatible notebooks and all-in-one PCs. The dual-channel configuration helps the memory controller move data more efficiently than a single stick of the same total capacity.

Upgraders with DDR3 platforms only

The kit suits owners of DDR3-era laptops, notebooks or AIOs that accept 204-pin SO-DIMMs and can run at PC3-10600 speed. Systems that require ECC or registered memory cannot use these modules, and any platform limited to a different DDR generation will not accept them. Buyers needing more than 8GB total capacity should look for higher-density kits that their specific model supports.

204-pin DDR3 SO-DIMM form factor

The decisive specification is the 204-pin DDR3 SO-DIMM interface, which physically and electrically defines whether the modules fit and function in a given machine. If the service manual or memory configurator for the target system lists 204-pin DDR3 SO-DIMM at 1333MHz (PC3-10600) non-ECC unbuffered, this kit matches that requirement.

Priekšrocības

  • 8GB dual-channel kit improves multitasking with two matched 4GB modules
  • DDR3 1333MHz CL9 speed accelerates everyday workloads
  • 204-pin SODIMM form factor fits compatible laptops and all-in-ones
  • Non-ECC unbuffered design ensures broad system compatibility
  • Rigorously tested modules deliver reliable long-term performance

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Laptop
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What does the 1333 MHz speed mean for my laptop's performance?

The 1333 MHz rating sets the maximum data rate the modules can deliver; actual throughput depends on the laptop's memory controller and whether it runs the RAM at that speed or a lower one.

What does the PC3-10600 designation indicate for this memory?

PC3-10600 is the JEDEC standard name for DDR3 1333 modules, confirming the rated speed and timing for system compatibility checks.

Will the 204-pin SODIMM modules fit my laptop's memory slots?

These modules use the standard 204-pin DDR3 SO-DIMM form factor, which fits laptops and all-in-ones designed for DDR3 memory.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.