Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular DDR3 server memory module with gold 240-pin edge connector and black chips on both sides

A-Tech

A-Tech 8GB DDR3 1066 ECC RDIMM 2Rx4 Server Memory

SKU CH-KN2X-FNHGT

8 GB DDR3 1066 MHz ECC registered server memory module with 2Rx4 organisation, CL3 latency and 1.5 V operation

  • Capacity8GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL3
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server multitasking headroom
  • DDR3 1066MHz speed matches PC3-8500 spec
  • ECC RDIMM registered design protects data integrity
  • 2Rx4 dual-rank Samsung chipset optimises throughput
  • 5V standard voltage ensures broad compatibility

8 GB DDR3-1066 ECC RDIMM for servers

This A-Tech module provides 8 GB of DDR3-1066 registered ECC memory on a 240-pin DIMM. It runs at the standard 1.50 V and uses a 2Rx4 organisation with Samsung chips. The CL3 latency and PC3-8500 rating suit enterprise workloads that demand data integrity.

Suits systems needing registered ECC DDR3.

The stick fits servers and workstations that require registered ECC DDR3 DIMMs. Builders whose motherboards accept only unbuffered non-ECC memory or a later DDR generation cannot use this module. Verify the platform documentation before buying.

Registered ECC 2Rx4 DDR3-1066 decides fit

The registered ECC 2Rx4 DDR3-1066 specification is the single detail that determines compatibility. Only systems designed for this exact memory type will recognise and operate the module correctly.

Priekšrocības

  • 8GB capacity expands server multitasking headroom
  • DDR3 1066MHz speed matches PC3-8500 spec
  • ECC RDIMM registered design protects data integrity
  • 2Rx4 dual-rank Samsung chipset optimises throughput
  • 5V standard voltage ensures broad compatibility

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for Samsung
ModelM393B1K70CHD-CF8
Capacity8GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL3
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetSamsung Chipset
FeaturesM393B1K70CHD-CF8

Jautājumi par šo preci

Will this 240-pin DDR3 DIMM fit my server's memory slots?

Yes, the module uses the standard 240-pin DDR3 DIMM form factor required by servers supporting DDR3 1066 registered ECC memory.

What is the correct way to install this registered ECC module, and what step is often missed?

Align the notch with the slot key, press firmly until both locking tabs click, and ensure the server BIOS recognises the ECC registered configuration at 1.5V.

When should I expect to replace this 8GB Samsung-chipset module?

DDR3 registered ECC modules typically run for the server's service life; replace only if memory diagnostics report correctable errors or the system fails POST.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.