Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular DDR3 DIMM with gold contacts and black chips

A-Tech

A-Tech 8GB DDR3 1333 ECC RDIMM 2Rx4 server RAM

SKU CH-Y2AD-FTBF2

An 8 GB DDR3 1333 MHz ECC registered DIMM with 2Rx4 organisation and 1.5 V operation for server memory upgrades

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server multitasking headroom
  • DDR3 1333MHz speed matches PC3-10600 system bus
  • ECC registered design protects data integrity
  • 2Rx4 rank layout fits compatible DIMM slots
  • 5V standard voltage ensures efficient operation

8GB DDR3 ECC RDIMM for servers

This 8GB DDR3 1333 ECC RDIMM module is built for servers and workstations that require registered memory with error correction. It uses a 2Rx4 organisation and runs at the standard 1.50V DDR3 voltage. The module is a compatible replacement for the Hynix HMT41GV7BMR4C-H9 part number.

240-pin DIMM installs in registered slots

Installation follows the standard 240-pin DIMM procedure for registered memory slots. The keying notch aligns with DDR3 registered sockets only; forcing it into an unbuffered desktop slot will damage the module or the motherboard. Ensure the retention clips engage fully on both sides after insertion. Mixing registered and unbuffered DIMMs in the same system will prevent boot.

Verify registered ECC support before ordering

Check that your server or workstation motherboard explicitly supports DDR3 registered ECC RDIMMs at 1333 MHz. Confirm the maximum capacity per slot and the total number of populated ranks the memory controller allows. Systems limited to unbuffered non-ECC memory cannot use this module. Consult the system manual for qualified vendor lists and population rules.

Priekšrocības

  • 8GB capacity expands server multitasking headroom
  • DDR3 1333MHz speed matches PC3-10600 system bus
  • ECC registered design protects data integrity
  • 2Rx4 rank layout fits compatible DIMM slots
  • 5V standard voltage ensures efficient operation

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMT41GV7BMR4C-H9
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesHMT41GV7BMR4C-H9

Jautājumi par šo preci

How can I confirm the DDR3 1333 module is running at PC3-10600 speed after installation?

Check the memory speed in your server BIOS or a hardware utility such as CPU-Z; it should report 1333 MHz and CL9 latency for this 2Rx4 registered DIMM.

What comes in the package and what must I purchase separately?

The box contains one 8 GB DDR3 240-pin ECC RDIMM; no additional cables, brackets or software are included.

Should I choose the 1.5 V 2Rx4 version or a different voltage or rank?

Select this 1.5 V 2Rx4 module when your server requires DDR3 1333 registered ECC memory with that exact voltage and rank configuration.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.