Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green PCB memory module with black chips and silver edge connectors

A-Tech

A-Tech 8GB DDR3 1333 ECC RDIMM 4Rx8 Server RAM

SKU CH-8X09-X4Y9K

8GB DDR3 1333MHz ECC registered server memory module with 4Rx8 organisation and 1.5V operation

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC error correction protects data integrity in servers
  • Registered 4Rx8 design supports high-density 8 GB module
  • DDR3 1333 MHz CL9 speed matches PC3-10600 spec
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • Tested replacement for Kingston KVR1333D3LQ8R9S/8GEC and KVR1333D3Q8R9S/8G

8GB DDR3 1333 ECC RDIMM

This 8GB registered DIMM runs at 1333 MHz with CL9 timing and 1.5 V standard voltage. It uses a 4Rx8 organisation and carries ECC for data integrity in server and workstation platforms. The module fits 240-pin DDR3 slots and is built as a compatible replacement for Kingston KVR1333D3LQ8R9S/8GEC and KVR1333D3Q8R9S/8G.

Thermals and power

Standard 1.5 V DDR3 voltage keeps power draw modest under typical server loads. Registered buffering reduces electrical load on the memory controller, helping maintain stable operation in multi-DIMM configurations. No active cooling is required beyond normal chassis airflow.

Upgrade context

This module replaces a failed or missing Kingston 8GB DDR3 1333 ECC RDIMM in qualified systems. The jump is worthwhile when expanding capacity on a platform that supports 4Rx8 registered memory and needs ECC protection for critical workloads. Buyers who need higher speeds, lower voltages, or unbuffered DIMMs should verify their platform specifications before ordering.

Priekšrocības

  • ECC error correction protects data integrity in servers
  • Registered 4Rx8 design supports high-density 8 GB module
  • DDR3 1333 MHz CL9 speed matches PC3-10600 spec
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • Tested replacement for Kingston KVR1333D3LQ8R9S/8GEC and KVR1333D3Q8R9S/8G

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for Kingston
ModelKVR1333D3LQ8R9S/8GEC, KVR1333D3Q8R9S/8G
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesKVR1333D3LQ8R9S/8GEC, KVR1333D3Q8R9S/8G

Jautājumi par šo preci

How do I install the 240-pin DDR3 RDIMM and what step is often missed?

Align the notch on the module with the key in the 240-pin slot, press firmly until both side clips click, then verify in BIOS that the 1.50V ECC registered module is recognised at 1333 MHz.

What maintenance or replacement will this 8GB 4Rx8 module need later?

No routine maintenance is required; replace the module only if memory diagnostics report uncorrectable ECC errors or the system fails to POST with it installed.

What limit appears first under sustained load with this CL9 1.5V registered DIMM?

The 1333 MHz DDR3 bus bandwidth and CL9 latency ceiling are reached before the 1.5V thermal envelope becomes a bottleneck.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.