Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green 240-pin DDR3 RDIMM module with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR3 1600MHz ECC RDIMM 1Rx4 Server Memory

SKU CH-3DWS-309Y5

An 8 GB DDR3 1600 MHz registered ECC module with a 1.5 V operating voltage and CL11 latency for server upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR3 1600MHz operation
  • 8GB capacity expands server workloads using a single 1Rx4 module
  • CL11 latency and 1.50V voltage deliver stable PC3-12800 performance
  • Micron chipset compatibility replaces MT18JSF1G72PZ-1G6D1FE and MT18JSF1G72PZ-1G6E1 parts
  • 240-pin RDIMM form factor fits standard DDR3 server DIMM slots

Server Memory Upgrade

This 8 GB DDR3 registered ECC module runs at 1600 MHz with CL11 latency and 1.50 V operation. It is built as a 1Rx4 RDIMM on a 240-pin DIMM form factor for server and workstation platforms. The Micron chipset base ensures reliable registered buffering for multi-module configurations.

Compatibility Check

Verify that your system accepts DDR3 RDIMM modules at 1600 MHz PC3-12800 with ECC and registered signalling. Confirm the motherboard supports 1Rx4 organisation and 1.50 V DDR3 standard voltage. Cross-reference the Micron part numbers MT18JSF1G72PZ-1G6D1FE and MT18JSF1G72PZ-1G6E1 against your qualified vendor list before ordering.

Thermals and Power

Standard 1.50 V DDR3 voltage keeps power draw within typical registered DIMM limits for this speed grade. Passive cooling via chassis airflow is sufficient; no active heatsink or fan is required on the module itself. Registered buffering adds negligible thermal load compared to unbuffered equivalents in normal server workloads.

Priekšrocības

  • ECC protection guards data integrity with registered DDR3 1600MHz operation
  • 8GB capacity expands server workloads using a single 1Rx4 module
  • CL11 latency and 1.50V voltage deliver stable PC3-12800 performance
  • Micron chipset compatibility replaces MT18JSF1G72PZ-1G6D1FE and MT18JSF1G72PZ-1G6E1 parts
  • 240-pin RDIMM form factor fits standard DDR3 server DIMM slots

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18JSF1G72PZ-1G6D1FE, MT18JSF1G72PZ-1G6E1
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMicron Chipset
FeaturesMT18JSF1G72PZ-1G6D1FE, MT18JSF1G72PZ-1G6E1

Jautājumi par šo preci

Does the 8GB DDR3 1600MHz ECC RDIMM ship as a single 240-pin module or do I need to buy anything else?

The listing is for one 8GB module (1 x 8GB) in a 240-pin DDR3 DIMM form factor. No extra parts are included; install it directly into a compatible server or workstation slot.

How do I choose between the Micron MT18JSF1G72PZ-1G6D1FE and MT18JSF1G72PZ-1G6E1 versions this module replaces?

Both Micron part numbers share the same 8GB capacity, DDR3 1600MHz speed, CL11 latency, 1.50V voltage, ECC registered design and 1Rx4 rank. This A-Tech module is a compatible equivalent for either part number.

What does the PC3-12800 rating mean for real-world server performance?

PC3-12800 denotes a peak transfer rate of 12,800 MB/s at 1600MHz. With CL11 timing and registered ECC operation, the module delivers stable, error-corrected throughput for typical server and workstation workloads.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.