Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR3 1600MHz PC3-12800 CL11 1.5V DIMM 2Rx8 Desktop Memory

SKU CH-A60T-GM3PX

8GB DDR3 1600MHz PC3-12800 CL11 1.5V 240-pin DIMM desktop memory module

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • 8GB capacity lets you run more programs simultaneously
  • DDR3 1600MHz speed delivers quick data transfer for responsive performance
  • CL11 latency supports smooth multitasking during everyday workloads
  • 5V standard voltage ensures broad compatibility with desktop motherboards
  • 240-pin DIMM form factor fits standard desktop memory slots

8GB DDR3 1600MHz Desktop Upgrade

This module provides 8GB of DDR3 memory running at 1600MHz with a CAS latency of 11. It is built for desktop systems that accept standard 240-pin DIMMs. The kit suits users wanting a straightforward capacity increase for everyday multitasking.

Tool-free DIMM installation

Align the notch on the 240-pin module with the motherboard slot key and press down until the retention clips snap shut. The unbuffered design requires no extra configuration in most boards. A common error is seating the stick unevenly so only one clip engages.

Check DDR3 slot voltage and capacity limit

Verify your motherboard supports DDR3 at 1.5V and can address an 8GB density per slot. Confirm the board accepts non-ECC unbuffered DIMMs rather than registered or ECC types. Consult the manual for the maximum total memory the platform can recognise.

Priekšrocības

  • 8GB capacity lets you run more programs simultaneously
  • DDR3 1600MHz speed delivers quick data transfer for responsive performance
  • CL11 latency supports smooth multitasking during everyday workloads
  • 5V standard voltage ensures broad compatibility with desktop motherboards
  • 240-pin DIMM form factor fits standard desktop memory slots

Specifikācijas

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Jautājumi par šo preci

How can I confirm the A-Tech 8GB DDR3 1600MHz module is running at the correct 1600 speed and CL11 timings after installation?

Enter the system BIOS or use a tool such as CPU-Z to verify the memory frequency reads 1600 MHz and the CAS latency shows CL11 at 1.50V.

What exactly is included in the package and what must I source separately?

The box contains one 8GB DDR3 240-pin DIMM module; no screws, cables or additional sticks are supplied.

Which capacity and speed version should I choose for a desktop that supports DDR3 1600 PC3-12800?

Select the 8GB DDR3 1600MHz CL11 1.5V DIMM listed here; it matches the PC3-12800 specification and is a single-module upgrade.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.