NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
An 8 GB registered ECC DDR3L module running at 1066 MHz with a low 1.35 V supply for server workloads
This A-Tech 8GB module is built for servers and workstations that require registered ECC memory. It runs at DDR3L 1066 (PC3L-8500) with a CAS latency of CL7 and operates at the low 1.35 V standard. The 4Rx8 organisation and 240-pin DIMM form factor match the Micron MT36KSF1G72PDZ-1G1 and MT36KSF1G72PDZ-1G1K1 part numbers it replaces.
Registered buffering and ECC correction keep data integrity intact during continuous multi-threaded workloads such as virtualisation, database serving or batch rendering. The low-voltage DDR3L chips reduce thermal output compared with standard 1.5 V DDR3, helping the module maintain stable frequencies inside densely populated DIMM banks over long periods.
The 240-pin DIMM seats in any compatible DDR3 server slot; alignment is keyed so it only fits one way. Systems that do not support registered ECC or that require a different rank configuration will not recognise the module, so verifying the motherboard’s qualified-vendor list before purchase avoids a non-posting system.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1066 (PC3L 8500) |
| CAS Latency | CL7 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
At 1.35V the DDR3L module draws less power and generates less heat than standard 1.5V DDR3, helping keep thermals manageable during continuous operation.
Your motherboard needs a DDR3 RDIMM slot, a chipset that supports registered ECC memory, and BIOS settings that enable ECC and the 4Rx8 organisation.
The module operates at DDR3 1066 MHz PC3L-8500; if the older modules run at the same voltage and speed the system will typically clock all sticks to the lowest common rate.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?