Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board with black memory chips and gold contacts along the bottom edge

A-Tech

A-Tech 8GB DDR4 2400MHz ECC UDIMM 1Rx8 Server RAM

SKU CH-4XMR-2ED1R

8GB DDR4 2400MHz ECC UDIMM module with CL17 latency and 1.2V operation for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity with error correction
  • 2400 MHz DDR4 speed enables responsive server workloads
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard server memory slots
  • Tested compatibility replaces Dell A9652462, A9654881, SNPMT9MYC/8G, MT9MY

8GB DDR4 2400MHz ECC UDIMM

This 8GB DDR4 module runs at 2400MHz with CL17 latency and 1.20V operation. It is an unbuffered ECC UDIMM built with a 1Rx8 rank configuration using major brand chips. The 288-pin DIMM targets server and workstation systems that require error-correcting memory.

ECC unbuffered DDR4 compatibility

The single specification that decides fit is the ECC unbuffered DDR4 2400MHz UDIMM format. Your motherboard must accept unbuffered ECC modules at this speed and voltage; registered or non-ECC DIMMs are not interchangeable with this part.

Suits servers needing ECC UDIMM upgrades

It suits administrators upgrading Dell systems referencing part numbers A9652462, A9654881, SNPMT9MYC/8G or MT9MY. Builders whose platforms require registered RDIMMs, non-ECC memory, or speeds other than DDR4 2400MHz should look at a different module.

Priekšrocības

  • ECC protection guards data integrity with error correction
  • 2400 MHz DDR4 speed enables responsive server workloads
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard server memory slots
  • Tested compatibility replaces Dell A9652462, A9654881, SNPMT9MYC/8G, MT9MY

Specifikācijas

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Jautājumi par šo preci

What does the 2400MHz rating mean once the module is installed in a server?

The module runs at 2400 MT/s, delivering a peak bandwidth of PC4-19200 on any DDR4 platform that supports this speed.

How does the DDR4 UDIMM interface limit performance in practice?

As an unbuffered ECC DIMM, it connects directly to the memory controller without a register, so the 2400 MT/s data rate and CL17 latency are the practical limits.

What physical slot and clearance does this 288-pin DIMM need?

It fits a standard DDR4 288-pin UDIMM slot and uses the 1.2V DDR4 voltage, so no extra power connectors or special cooling are required.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.