Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with gold edge contacts and black memory chips, no heat spreader

A-Tech

A-Tech 8GB DDR5 5600MHz CL46 UDIMM 288-Pin 1.1V desktop RAM

SKU CH-4YWC-A6768

8 GB DDR5 module at 5600 MHz with CL46 latency and 1.1 V operation for desktop upgrades

  • Capacity8GB
  • SpeedDDR5 5600 (PC5 44800)
  • Tested Frequency5600
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Capacity 8GB

Speed DDR5 5600 (PC5 44800)

CAS Latency CL46

  • CL40
  • CL42
  • CL46

Color

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • 8GB capacity expands multitasking headroom for everyday workloads
  • DDR5 5600MHz speed delivers 44800 MT/s data rate for responsive performance
  • CL46 latency at 1.1V balances timing with DDR5 standard voltage
  • 288-pin UDIMM form factor fits desktop DDR5 memory slots
  • Major-brand chips tested for reliable operation in compatible systems

8GB DDR5 5600MHz Module

This A-Tech module delivers 8GB of DDR5 memory at 5600MHz with CL46 latency. It is built for desktop PCs that accept DDR5 DIMM memory and need a straightforward capacity increase. The stick runs at the standard 1.1V voltage for the platform.

288-Pin Unbuffered DIMM Fit

The module uses a 288-pin UDIMM form factor and is unbuffered non-ECC, so it slots directly into consumer desktop boards without registered memory support. Major-brand chips provide the storage array, while the lack of a heat spreader keeps the profile low for tighter CPU cooler clearances. Compatibility spans AMD and Intel platforms that specify DDR5-5600 support.

Sustained Load Behaviour

At the rated 5600MHz and 1.10V the module maintains its CL46 timings during extended workloads rather than only in short bursts. The native DDR5 on-die ECC helps preserve data integrity when the system runs hot for long periods. Quality-assurance testing validates stability across the full operating envelope.

Priekšrocības

  • 8GB capacity expands multitasking headroom for everyday workloads
  • DDR5 5600MHz speed delivers 44800 MT/s data rate for responsive performance
  • CL46 latency at 1.1V balances timing with DDR5 standard voltage
  • 288-pin UDIMM form factor fits desktop DDR5 memory slots
  • Major-brand chips tested for reliable operation in compatible systems

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
Capacity8GB
SpeedDDR5 5600 (PC5 44800)
Tested Frequency5600
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips
Recommend UseAMD & Intel Compatible

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will this module fit my DDR5 motherboard slot?

The stick uses the standard 288-pin DIMM form factor required by desktop DDR5 motherboards.

What BIOS setting ensures it runs at the rated 5600 MT/s?

Enable the board's XMP or EXPO profile; the SPD stores a CL46 5600 profile at 1.1 V.

Can I add this single 8 GB stick to an existing DDR5 kit?

Yes, it is a non-ECC unbuffered module; mixing is possible but matching capacity and timings gives the best stability.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.