Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green 240-pin DDR3L RDIMM module with black chips and gold contacts

A-Tech

A-Tech Supermicro Certified 16GB DDR3L 1600 2Rx4 ECC RDIMM

SKU CH-H3PN-EPPQF

Supermicro-certified 16 GB DDR3L 1600 registered ECC RDIMM with 2Rx4 organisation and 1.35 V operation

  • Capacity16GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • 16 GB DDR3L 1600 MHz CL11 expands capacity
  • 35 V low-voltage operation reduces power draw
  • ECC registered 2Rx4 design protects data integrity
  • 240-pin RDIMM form factor fits standard slots

16GB DDR3L RDIMM for Supermicro Servers

This 16GB DDR3L 1600 registered ECC module is built for Supermicro server platforms that require 240-pin RDIMM memory. It suits administrators upgrading compatible systems to handle larger workloads and virtualisation tasks.

Supermicro Certified with Hynix Components

The module carries Supermicro certification (MEM-DR316L-HL03-ER16) and uses Hynix HMT42GR7AFR4A-PB chips. Registered buffering and ECC protect data integrity, while 1.35V DDR3L operation reduces power draw compared to standard DDR3. The 240-pin form factor fits supported server DIMM slots directly.

Replaces Lower-Capacity or Non-ECC DDR3 Modules

This kit replaces smaller DDR3 RDIMMs or non-ECC memory where registered ECC is required for stability. The jump is worth it when your Supermicro system supports 16GB dual-rank modules at 1600MHz and you need the reliability of certified, low-voltage server memory.

Priekšrocības

  • Supermicro certified for guaranteed server compatibility
  • 16 GB DDR3L 1600 MHz CL11 expands capacity
  • 35 V low-voltage operation reduces power draw
  • ECC registered 2Rx4 design protects data integrity
  • 240-pin RDIMM form factor fits standard slots

Specifikācijas

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR316L-HL03-ER16
Capacity16GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR316L-HL03-ER16 (HMT42GR7AFR4A-PB)

Jautājumi par šo preci

What does DDR3L 1600 (PC3L 12800) mean for real-world bandwidth?

The module runs at 1600 MT/s with a peak transfer rate of 12800 MB/s. The DDR3L standard operates at 1.35 V, so it draws less power than standard DDR3 while keeping the same 240-pin RDIMM form factor.

Will this 240-pin RDIMM fit my Supermicro server's DIMM slots?

Yes. The stick is a 240-pin registered DIMM (RDIMM) with a 2Rx4 dual-rank layout. It matches the physical keying and electrical load expected by Supermicro platforms that list the MEM-DR316L-HL03-ER16 part number.

What is the correct seating procedure for this registered ECC module?

Power down the server and open the chassis. Align the notch on the module's gold edge with the key in the DDR3 slot, press straight down until both side clips click shut, then verify the module height is flush with neighbouring DIMMs. The step most often missed is confirming the clips have fully latched on both sides.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.