Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Six black PCI-E riser boards with USB 3.0 cables and LED indicator lights

AFRNDK

AFRNDK 6PCS PCI-E Riser VER010-X USB 3.0 Mining Hardware

SKU CH-FXXY-4CNNP

Six PCI-E riser boards with eight capacitors each, LED fault indicators and USB 3.0 cables at 60 cm for GPU mining rigs

  • Thick boards add durability for heavy GPUs
  • Extra solder on underside reduces short-circuit risk
  • Dual 6-pin plus Molex power inputs on each riser
  • Seven onboard LEDs simplify fault monitoring
  • Six sets include 60 cm USB 3.0 cables

6-Pack PCIe Riser Kit for Mining

The AFRNDK 6PCS PCI-E Riser VER010-X USB 3.0 set provides six complete riser assemblies designed to connect graphics cards to a motherboard for cryptocurrency mining rigs. Each unit includes a riser board, a 1X chip board with LED indicator, and a 60cm USB 3.0 cable. This kit targets builders assembling multi-GPU mining systems who need multiple risers in a single purchase.

Dual Power Input Options on Each Riser

Every riser board in this kit features onboard Molex and dual 6-pin power connectors, allowing the installer to choose the cable type that matches the available power supply leads. The boards use an 8-capacitor design with reinforced soldering on the underside to reduce the risk of shorts during continuous operation. Six LED indicators on the main board and one on the chip board provide visual status feedback for troubleshooting.

Suits Builders Needing Multiple USB 3.0 Risers

This package suits miners who want a ready bundle of six risers with 60cm cables and the option of Molex or 6-pin power on each unit. It is not for builders who require longer cables than 60cm, need a different interface than USB 3.0, or want a single riser rather than a six-pack. The fixed cable length and pack quantity define the use case.

Priekšrocības

  • Thick boards add durability for heavy GPUs
  • Extra solder on underside reduces short-circuit risk
  • Dual 6-pin plus Molex power inputs on each riser
  • Seven onboard LEDs simplify fault monitoring
  • Six sets include 60 cm USB 3.0 cables

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How does the 16-lane slot on the riser actually connect to the motherboard?

The riser presents a full-size x16 slot to the graphics card but routes only a single lane through the USB 3.0 cord to a x1 host connector.

What practical bandwidth limit does the USB 3.0 cord impose on the GPU?

The cord carries one PCIe lane at USB 3.0 speed, capping throughput well below a native x16 connection and making it suitable only for mining workloads.

What clearance and power connectors are required to install each riser?

Each board needs a USB 3.0 header or cable, plus either a Molex plug or one of the two onboard 6-pin sockets, and 60 cm of cord length for spacing.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.