Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular metal mining unit, matte grey finish, dual front fans, Ethernet port visible

AFRNDK

AFRNDK Antminer S21+ 225TH/s 3564W Bitcoin mining hardware

SKU CH-7V3Y-R4Z0K

SHA-256 ASIC miner delivers 225 TH/s at 3564 W with 75 dB noise in a 400 x 195 x 290 mm chassis

  • TypeMining Machine/Miner
  • Crypto AlgorithmSHA256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate225TH/S
  • Noise level85dB
  • Delivers 225 TH/s hashrate for maximum Bitcoin output
  • Operates at 3564 W power draw for efficient energy use
  • Runs at 75 dB noise level for quieter facility deployment
  • Compact 400 x 195 x 290 mm frame fits dense rack layouts
  • Functions reliably from 10 °C to 40 °C ambient temperature

ASIC Bitcoin miner for SHA-256

The AFRNDK Antminer S21+ is an application-specific integrated circuit built to mine Bitcoin using the SHA-256 algorithm. It delivers a hashrate of 225TH/s while drawing 3564W of power. The unit is intended for operators who run dedicated mining infrastructure and can supply 220V input power. It is not suited for buyers who need a general-purpose computer or a quiet home device.

Ethernet interface and dual-fan cooling

The miner connects to the network through a single Ethernet port and uses two built-in fans to move air through the chassis. No additional controllers, cables or software licences are mentioned in the supplied data. The package therefore assumes the operator already has a compatible network switch, a 220V power distribution unit and a rack or shelf that accepts the 400 x 195 x 290mm form factor. Buyers who lack these supporting items must source them separately.

Environmental limits of 10 to 40 °C

Operation is specified between 10 °C and 40 °C with relative humidity from 10 % to 90 %. The manufacturer also lists a noise level of 75 dB, while another data point shows 85 dB; the higher figure should be planned for in shared spaces. The 220V supply requirement is strict — incorrect voltage can damage the hardware. Sites without stable 220V power, adequate cooling capacity or sound isolation cannot run this miner reliably.

Priekšrocības

  • Delivers 225 TH/s hashrate for maximum Bitcoin output
  • Operates at 3564 W power draw for efficient energy use
  • Runs at 75 dB noise level for quieter facility deployment
  • Compact 400 x 195 x 290 mm frame fits dense rack layouts
  • Functions reliably from 10 °C to 40 °C ambient temperature

Specifikācijas

BrandANTMINER
SeriesS21
ModelS21PLUS
TypeMining Machine/Miner
Crypto AlgorithmSHA256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate225TH/S
Noise level85dB
Power Consumption3564W

Jautājumi par šo preci

Which part will likely need replacement first on the Antminer S21+?

The two cooling fans are the only moving parts and will wear out before the ASIC boards under continuous operation.

What limit appears first when the Antminer S21+ runs continuously at 3564 W?

The operating temperature ceiling of 40 °C is reached before any power or hashrate ceiling, so inlet cooling capacity becomes the bottleneck.

How loud and how hot does the Antminer S21+ get during all-day mining?

It produces 75 dB to 85 dB of noise with its dual fans while exhausting enough heat to keep the chassis within the 10–40 °C operating window at 3564 W.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.