Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Gold shell Echo E-KA1M ASIC miner rectangular gold chassis two fans front view

AFRNDK

AFRNDK Gold shell Echo E-KA1M 5.5T 1800W mining hardware

SKU CH-2W2F-VX1XX

An ASIC miner for Kaspa delivering 5.5 TH/s at 1800 W with air cooling and 50 dB noise

  • TypeMining Machine/Miner
  • Compatible CurrencyKAS
  • Mining HardwareASIC
  • Hashrate5.5T
  • Noise level50dB
  • Fan2
  • Mines Kaspa at 5.5 TH/s with 1800 W draw
  • Runs at 50 dB for quiet home placement
  • Air-cooled by two fans across 5–45 °C range
  • Operates on 110 V circuits with adequate capacity
  • Ethernet interface for stable wired connectivity

Goldshell Echo E-KA1M 5.5T Miner

The Goldshell Echo E-KA1M is an ASIC miner built for the Kaspa algorithm and delivers a hashrate of 5.5T. It draws up to 1800W and operates at a noise level of 50dB using two fans. The unit is intended for home mining use and shipped new in September 2024.

Voltage and circuit checks before ordering

The miner supports 110V supplies and consumes up to 1800W, so the household circuit must be rated for that continuous load. Operating temperature range is 5 to 45 °C and humidity range is 5 to 95 %, so the room must stay within those limits. The device emits heat that can raise ambient temperature during operation.

Air-cooled build with Ethernet link

Air cooling is provided by two fans in a chassis designed for low-noise home environments. A wired Ethernet interface handles pool connectivity and management access. The package includes a matched power supply unit for the 1800W draw. No wireless link is fitted despite the supplier title mentioning WiFi.

Priekšrocības

  • Mines Kaspa at 5.5 TH/s with 1800 W draw
  • Runs at 50 dB for quiet home placement
  • Air-cooled by two fans across 5–45 °C range
  • Operates on 110 V circuits with adequate capacity
  • Ethernet interface for stable wired connectivity

Specifikācijas

BrandGold shell
SeriesE-KA1M
Modele-ka1m
TypeMining Machine/Miner
Compatible CurrencyKAS
Mining HardwareASIC
Hashrate5.5T
Noise level50dB
Fan2
Power Consumption1800W

Jautājumi par šo preci

Will this miner run on a standard 110 V household circuit?

The unit is rated for 110 V areas and draws up to 1800 W; verify that the branch circuit can supply the required current without tripping.

How loud is the miner in a typical home room?

Specified noise is 50 dB with two fans, comparable to a quiet conversation; expect noticeable airflow sound at close range.

What ambient conditions are safe for continuous operation?

Operating range is 5 °C to 45 °C and 5 % to 95 % humidity; keep the intake air within these limits to avoid thermal throttling.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.