Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

Allied Telesis

Allied Telesis AT-2914SX/SC-901 network card

SKU CH-F8NZ-QERR4 MPN AT-2914SX/SC-901

A PCIe x1 fibre adapter with SC connector delivering 10/100/1000 Mbps links, VLAN tagging, LACP aggregation and jumbo frames up to 9.6 KB

  • StandardsIEEE 802.1p Quality of Service IEEE 802.1Q VLANs IEEE 802.2
  • Speed10/100/1000Mbps
  • Connectors1 x SC
  • InterfacePCIe x1
  • BUSPCI bus
  • LEDsOn: Link up Off: Link down Blinking: Activity
  • Gigabit fibre connectivity via SC connector
  • PCIe x1 host interface for modern servers
  • VLAN tagging and QoS for traffic prioritisation
  • Link aggregation with LACP and failover resilience
  • TAA compliant with RoHS and WEEE certifications

PCIe x1 Fiber Adapter

The Allied Telesis AT-2914SX/SC-901 is a PCI Express x1 network interface card designed for 1000Base-SX fiber connectivity. It targets IT teams deploying managed links in commercial or campus environments that require TAA-compliant hardware.

SC Connector and Low-Profile Build

A single SC optical port connects directly to multimode fiber patch cables while the plug-in card form factor fits low-profile brackets. LEDs show link status and activity at a glance, and the board operates from 0 to 50 °C with humidity up to 90 % non-condensing.

Gigabit Fiber Limits

The 1000Base-SX standard restricts reach to typical multimode distances and does not support single-mode runs. Jumbo frames top out at 9.6 KB, and the x1 host interface caps throughput at the PCIe lane’s maximum.

Priekšrocības

  • Gigabit fibre connectivity via SC connector
  • PCIe x1 host interface for modern servers
  • VLAN tagging and QoS for traffic prioritisation
  • Link aggregation with LACP and failover resilience
  • TAA compliant with RoHS and WEEE certifications

Specifikācijas

BrandAllied Telesis
ModelAT-2914SX/SC-901
StandardsIEEE 802.1p Quality of Service
IEEE 802.1Q VLANs
IEEE 802.2 LLC
IEEE 802.3ac MAC
IEEE 802.3x Flow control auto-negotiation
IEEE 802.3z 1000 Base-X
IEEE 802.3ad Link aggregation
Speed10/100/1000Mbps
Connectors1 x SC
InterfacePCIe x1
BUSPCI bus
LEDsOn: Link up
Off: Link down
Blinking: Activity
DriversWindows 7
Windows 10
Windows Server 2019
Windows Server 2016
Linux
Wake On LANYes
Temperature0°C to 50°C (32°F to 122°F)
Humidity5% to 90% (non-condensing)
FeaturesVLAN support
Link aggregation LACP
Link aggregation smart switch
Failover
WoL support
Jumbo frames up to 9.6KB
Secure transmissions
PCI Express (PCIe x 1)
Smart Load Balancing (SLB) and failover
Link aggregation (IEEE 802.3ad)
Generic trunking (FEC/GEC) / IEEE 802.3ad-draft static
UEFI network boot
IEEE 802.1x flow control
SNMP
IPv6
Low-profile brackets attached. Standard Height Included in packaging
Vista, 7, 8, 10, and Linux
Dimensions3.5" x 2.7"
Weight0.13 lbs.
Sūtījuma svars0.09 kg
Sūtījuma izmēri230 × 180 × 5 mm

Jautājumi par šo preci

What does the PCIe x1 interface cap the 1000Base-SX link at in practice?

The PCIe x1 host interface provides enough bandwidth for full 1000 Mbps throughput on the 1000Base-SX fiber link.

What slot and bracket height does the AT-2914SX/SC-901 need to fit?

It requires a standard PCIe x1 slot and a low-profile bracket; the card measures 3.5" x 2.7".

How is the driver installed, and what step do people miss?

Install the driver for Windows 7, 10, Server 2016 or 2019, or Linux, then enable Wake On LAN in the adapter properties — that setting is off by default.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.