Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black rubber O-ring 10mm diameter 2mm thick

Alphacool

Alphacool 95016 O-ring 10 x 2mm SLI-Nipple NBR black

SKU CH-34V6-8DMK0

Replacement NBR O-ring with 10 mm inner diameter and 2 mm cross-section seals SLI nipples lacking a groove

  • ColorBlack
  • FeaturesO-Ring 9.5 x 2mm (SLI-Nipple)
  • Replacement seal for groove-less fittings with 2 mm thick NBR material
  • Guaranteed sealing on SLI nipples despite missing standard O-ring groove
  • Nitrile rubber construction resists coolant and temperature cycling
  • Precise 10 mm inner diameter matches SLI nipple specifications
  • Single 95016 O-ring supplied ready for immediate installation

Alphacool 95016 O-Ring 10 x 2mm

This Alphacool 95016 O-ring is a replacement seal for custom water-cooling fittings that lack a standard groove. It is intended for builders maintaining or assembling a liquid-cooled loop who need a reliable seal on SLI-style nipples. The NBR material resists common coolants and provides durable elasticity for repeated assembly.

Practical limits of the flat-seat interface

Without a machined groove the seal relies entirely on compression between two flat surfaces. The 2 mm cross-section compensates for the missing groove by creating a wider contact patch that tolerates minor surface imperfections. Over-tightening can still extrude the NBR, so torque must be controlled during installation.

The 9.5 mm internal diameter decides fit

The critical specification is the 9.5 mm internal diameter, which must match the nipple bore exactly for a leak-free joint. If the fitting bore is larger or smaller this ring will not seal and a different size is required. Buyers who need a different bore diameter or a groove-mounted seal cannot use this part.

Priekšrocības

  • Replacement seal for groove-less fittings with 2 mm thick NBR material
  • Guaranteed sealing on SLI nipples despite missing standard O-ring groove
  • Nitrile rubber construction resists coolant and temperature cycling
  • Precise 10 mm inner diameter matches SLI nipple specifications
  • Single 95016 O-ring supplied ready for immediate installation

Specifikācijas

BrandAlphacool
Model95016
ColorBlack
FeaturesO-Ring 9.5 x 2mm (SLI-Nipple)

Jautājumi par šo preci

Which size O-ring do I need for my SLI nipple fitting?

This replacement O-ring has a 10 mm internal diameter and 2 mm thickness, matching the 95016 specification for SLI nipples.

What does the 10 mm internal diameter mean once the ring is seated?

The 10 mm bore fits over the nipple's outer surface, and the 2 mm cross-section compresses to create a watertight seal even without a machined groove.

What material is the seal made from and what fluid compatibility does it cover?

The ring is moulded from NBR (nitrile rubber), which resists water, glycol coolants and common PC liquid-cooling additives.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.