Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Brass 90-degree hard tube, 13 mm OD, deep black gloss, 40 cm by 20 cm legs

Alphacool

Alphacool Brass HardTube 13mm OD 90° Deep Black 20/40cm

SKU CH-K7ZG-XXG06

Pre-bent brass tubing with a 90-degree angle, 13 mm outer diameter and a 20/40 cm leg length for custom liquid-cooling loops

  • TypeTubing

Color Black

  • 90° pre-bent brass tube simplifies tight loop routing
  • 13 mm OD with 12.2 mm ID fits standard compression fittings
  • Deep Black gloss coating resists scratches and chipping
  • 8 mm wall thickness balances rigidity and easy cutting
  • 20 cm and 40 cm legs cover common component spacing

Brass HardTube for Custom Loops

These Alphacool Brass HardTubes are made for builders creating a custom liquid cooling loop who want a rigid, premium look. The 90° pre-bent shape suits tight routing between components in a 13 mm outer diameter system. They arrive new with a Deep Black gloss coating.

Installation and Common Issues

Cutting the brass requires a suitable tube cutter; afterwards you must deburr the ends with fine sandpaper or a dedicated deburrer to protect fitting O-rings. The .8 mm wall is strong yet thin enough to cut without great effort. Over-bending or forcing the tube can chip the coating.

Capacity and Headroom

The set provides a 40 cm long leg and a 20 cm short leg, giving enough reach for typical CPU-to-GPU or reservoir-to-pump runs in a mid-tower. Longer spans or complex multi-angle routes will need additional straight tubes or extra 90° pieces.

Priekšrocības

  • 90° pre-bent brass tube simplifies tight loop routing
  • 13 mm OD with 12.2 mm ID fits standard compression fittings
  • Deep Black gloss coating resists scratches and chipping
  • 8 mm wall thickness balances rigidity and easy cutting
  • 20 cm and 40 cm legs cover common component spacing

Specifikācijas

TypeTubing

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How can I verify the 90° brass tube is seated correctly after installation?

Confirm the 13 mm outer diameter slides fully into each fitting until the 12.2 mm bore meets the O-ring, then pressure-test the loop for leaks before powering on.

What lengths and items are included versus what I must source separately?

The pack contains one pre-bent 90° tube with a 40 cm long leg and a 20 cm short leg; fittings, coolant and cutting or deburring tools are not included.

Which version suits a loop needing a tight 90° turn in Deep Black finish?

Choose the 13 mm OD brass HardTube with 40 cm and 20 cm legs in Deep Black gloss coating, MPN 18611, for a compact right-angle run.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.