Alphacool Eiszapfen Filter G1/4 Deep Black 1012588
- Black
- A high flow, inline…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Alphacool
Inline G1/4 filter with stainless-steel micro-mesh protects micro-structure coolers from clogging while maintaining high flow rates
Color Clear
The Alphacool Eiszapfen filter is a clear POM plexi component with a stainless steel fibre microfilter. It threads into any G1/4 inch port and measures 20 by 25 millimetres. The unit ships new as part number 1012586 and includes one filter in the box. It is built for custom liquid cooling circuits that need debris protection without restricting coolant movement.
Builders running dense microchannel water blocks benefit because the mesh stops particles that would otherwise clog narrow passages. The design delivers flow around fifty percent higher than an eight millimetre inner diameter tube and thirty percent higher than a ten millimetre tube, so restrictive blocks stay fed. Buyers who need a filter for larger debris or who cannot accommodate the 20 by 25 millimetre envelope should look elsewhere.
The filter media adds no measurable resistance until it reaches thirty to fifty percent clogging, making it the decisive specification for loops that prioritise pump headroom. Two G1/4 inch inner threads allow straightforward inline placement anywhere in the circuit. The clear POM plexi body lets you inspect contamination visually without disassembly.
| Brand | Alphacool |
|---|---|
| Model | 1012586 |
| Color | Clear |
| Features | A high flow, inline G1/4" fitting from Alphacool |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
This model is a single 20x25mm inline filter with dual G1/4 inner threads. Choose it when your tubing and fittings use G1/4 threads and you need a compact filter that fits between standard water-block ports.
The stainless-steel microfilter flows roughly 50% better than an 8mm ID tube and 30% better than a 10mm ID tube. You will only see a measurable drop once the mesh reaches 30-50% blockage, keeping pump load low in normal use.
Both ends use G1/4 inner threads, so any standard G1/4 male fitting — rigid, soft-tube or compression — will connect directly. The thread itself does not restrict flow; the 25mm long filter body and microfilter mesh set the practical limit.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?