Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Compact high-voltage DC-DC module with 24V input, -7kV output, metal enclosure

Analog Technologies

Analog Technologies High Voltage Power Supply 0 to -7kV 1mA 24V Input AHV24VN7KV1MAW

SKU CH-601Q-XCX5B

Compact DC-DC module converts 24 V input to an adjustable 0 to -7 kV output at up to 1 mA for X-ray, spectroscopy and coating systems

  • TypeHigh Voltage Power Supply
  • 0 to -7 kV adjustable output for high-voltage applications
  • 1 mA maximum current supports precision low-power loads
  • 24 V DC input with 90 mA to 500 mA draw fits standard supplies
  • 0–5 V control voltage enables full-span modulation
  • Electronic shutdown control adds safety during operation

Compact High-Voltage DC-DC Module

This module converts a 24V DC input into an adjustable negative output up to 7 kV with a maximum current of 1 mA. It is built for engineers integrating high-voltage bias into scientific or industrial equipment such as X-ray sources, spectroscopy systems or electrospinning rigs.

Input Range and Control Constraints

The unit accepts a 24 V supply with a tolerance of ±1 V and draws between 90 mA and 500 mA depending on load. Output voltage is set by a 0 to 5 V control signal referenced to an internal 5 V ± 0.05 V rail, and an electronic shutdown pin is provided for fast disable.

Replaces Bulkier Rack Supplies in Fixed-Polarity

Designers migrating from large laboratory HV racks gain a PCB-mountable footprint and direct voltage-mode control without external programming hardware. The jump is worthwhile when the application requires only negative polarity up to 7 kV at milliampere levels and can tolerate the fixed input voltage window.

Priekšrocības

  • 0 to -7 kV adjustable output for high-voltage applications
  • 1 mA maximum current supports precision low-power loads
  • 24 V DC input with 90 mA to 500 mA draw fits standard supplies
  • 0–5 V control voltage enables full-span modulation
  • Electronic shutdown control adds safety during operation

Specifikācijas

TypeHigh Voltage Power Supply

Jautājumi par šo preci

Should I choose the 0 to -7kV model or a different voltage range?

This module delivers 0 to -7 kV adjustable via a 0 to 5 V control signal with a maximum output current of 1 mA.

What does the 1 mA maximum output current mean for my application?

It limits the continuous power available at high voltage, so the unit suits low-current uses such as electrostatic lenses or capillary electrophoresis.

How does the 24 V input and 0 to 5 V control interface constrain operation?

The supply requires 24 V ± 1 V drawing 90 to 500 mA, and the 0 to 5 V control voltage sets the output proportionally across the full 0 to -7 kV span.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.