NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
ASUS
Mid-tower chassis for Micro-ATX and Mini-ITX boards with rear-mount support, 360 mm radiator room, tempered glass side, and front USB 3.2 Gen 2×2 Type-C
The ASUS A21 Zhuiying Shadow Black is a mid-tower case built for Micro-ATX and Mini-ITX motherboards. It supports rear-mounted motherboard layouts such as MATX and YTX for alternative build configurations. A tempered glass side panel displays the interior while steel and plastic construction provides structure. Front I/O includes two USB 3.2 Gen 2x2 Type-C ports, four USB 3.2 Gen 1 ports and a combined headphone and microphone jack.
Builders moving from tighter Mini-ITX boxes or older mid-towers gain support for graphics cards up to 380 mm long and CPU coolers up to 165 mm tall. Radiator mounts on the front and top accept 360 mm or 280 mm units for liquid cooling upgrades. The rear cable management channel offers 33 mm of clearance for cleaner routing. Power supplies up to 210 mm deep fit without modification.
Motherboard standoffs align with Micro-ATX and Mini-ITX patterns and the rear-mounted tray uses the same mounting points. Drive installation uses two 3.5 or 2.5 inch bays plus a dedicated 2.5 inch slot. Pre-installed dust filters on the top and bottom panels lift out for cleaning. Front panel USB 3.2 Gen 2x2 Type-C headers require a compatible motherboard connector or an adapter cable.
| Motherboard Compatibility | Micro-ATX Mini-ITX |
|---|---|
| Color | Black |
| Case Material | Steel,Tempered Glass,Plastic |
| With Power Supply | No |
| Front Ports | 1 x Headphones / Microphone 2 x USB 3.2 Gen 2x2 Type-C 4 x USB 3.2 Gen 1 |
| Brand | ASUS |
The case accepts graphics cards up to 380 mm long and CPU coolers up to 165 mm tall, leaving room for most mid-range and high-end air coolers.
Use the included standoffs for Micro-ATX or Mini-ITX patterns, align the I/O shield with the rear cut-out, and secure the board before routing cables through the 33 mm clearance channel.
Magnetic filters sit on the top panel and the bottom of the chassis; remove and rinse them every few months or when visible dust builds up to maintain airflow.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?