Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular ATX power supply, matte black finish, OLED display on side, 135mm fan visible

ASUS

ASUS ROG Thor 1600W Titanium Power Supply

SKU CH-QH6M-RC87V

Fully modular 1600W ATX supply with 80 Plus Titanium efficiency, Japanese capacitors, gallium nitride MOSFETs, 135mm Axial-tech fan and real-time OLED power monitoring

  • TypeATX12V / EPS12V
  • 80 Plus Titanium certified for maximum efficiency
  • 100% Japanese capacitors ensure long-term reliability
  • Gallium nitride MOSFETs reduce switching losses for better efficiency
  • 135 mm Axial-tech fan with PWM keeps noise low
  • OLED display shows real-time power draw

1600W Titanium ATX Power Supply

The ASUS ROG Thor delivers 1600 watts of fully modular power with 80 Plus Titanium certification. It uses 100 percent Japanese capacitors and gallium nitride MOSFETs for high efficiency. A 135mm Axial-tech fan and ROG heatsinks keep temperatures low. An integrated OLED panel shows real-time power draw.

Upgrade From Lower Efficiency Units

This unit replaces older power supplies that lack Titanium-rated efficiency or modern GaN transistors. The jump is worth it when a build demands 1600 watts of clean power with minimal switching losses. Fully modular cables simplify installation in high-end systems. Real-time monitoring helps verify load levels instantly.

Enthusiasts Building Extreme Workstations

Suits builders assembling multi-GPU rigs or heavily overclocked platforms that need 1600 watts of Titanium-grade delivery. Buyers who want more storage or require a smaller form factor should look at something else. The OLED display and premium components target users who value visibility and component quality. Those needing only modest wattage will find the capacity excessive.

Priekšrocības

  • 80 Plus Titanium certified for maximum efficiency
  • 100% Japanese capacitors ensure long-term reliability
  • Gallium nitride MOSFETs reduce switching losses for better efficiency
  • 135 mm Axial-tech fan with PWM keeps noise low
  • OLED display shows real-time power draw

Specifikācijas

TypeATX12V / EPS12V

Jautājumi par šo preci

What case clearance does the 135 mm axial-tech fan and OLED display require?

The unit follows the standard ATX power-supply form factor; the 135 mm fan and front-facing OLED panel need the usual rear mounting cut-out and enough depth for cable routing behind the chassis.

Which modular cables must be connected during installation to avoid a no-post condition?

Seat the 24-pin ATX motherboard cable, the 8-pin or 4+4-pin EPS CPU cable, and any PCIe power cables your graphics cards require; the fully modular design means only the cables you attach carry current.

How do I clean the 135 mm axial-tech fan and verify the OLED read-out stays accurate over time?

Power off and unplug the supply, then use short bursts of compressed air through the fan grille to remove dust; the OLED display is passive and needs no calibration, but avoid pressing on the panel.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.