Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
White cylindrical inline duct fan with speed controller unit attached

AUTO-VOX 6" Inline Exhaust Fan 345 CFM 32dB Speed Controller

SKU CH-FH9T-H875W

A 6-inch inline duct fan delivering 345 CFM airflow at 32 dB with a stepless speed controller for grow tents, basements and workshops

  • TypeBlower Fans
  • Air Flow345 cubic_feet_per_minute
  • Hznot_applicable
  • PhaseEC Motor
  • MaterialPlastic
  • Mount TypeWall Mount
  • Moves 345 CFM of air for rapid ventilation
  • Runs at 32 dB for quiet operation
  • EC motor cuts energy use and extends service life
  • Stepless speed controller lets you match airflow to the task
  • ABS housing with PBT blades resists deformation and adds stall protection

6" Inline Exhaust Fan for Workshops

The AUTO-VOX 6" inline exhaust fan delivers up to 345 CFM of airflow for grow tents, basements, bathrooms, kitchens, attics and workshops. It suits growers and DIYers who need reliable ventilation in a single duct run. Buyers who require multiple zones or integrated carbon filtration will need a more complex system.

Thermals Noise and Power Draw

The EC motor provides high efficiency with low energy consumption and extended service life. Operation stays at just 32 dB(A) for a peaceful environment. Stall protection and a wide voltage range adapter add safety during continuous use.

Stepless Speed Controller Benefits

The bundled stepless speed regulator lets you match fan speed precisely to the current ventilation demand. This reduces unnecessary noise and power draw when full airflow is not required. ABS housing and PBT blades resist deformation for durable performance.

Priekšrocības

  • Moves 345 CFM of air for rapid ventilation
  • Runs at 32 dB for quiet operation
  • EC motor cuts energy use and extends service life
  • Stepless speed controller lets you match airflow to the task
  • ABS housing with PBT blades resists deformation and adds stall protection

Specifikācijas

TypeBlower Fans
BrandAUTO-VOX
ModelHand Rivet Nut Setter Kit
Air Flow345 cubic_feet_per_minute
Hznot_applicable
PhaseEC Motor
MaterialPlastic
Mount TypeWall Mount
Fan Typeblower

Jautājumi par šo preci

How do I mount the 6" inline fan to the wall and connect ducting without leaks?

Secure the ABS housing to a solid surface with appropriate screws through the mounting flanges, then slide ducting over the 6" spigots and seal each joint with foil tape or worm-drive clamps; the step most often missed is sealing both the intake and exhaust connections so the 345 CFM rating is actually achieved.

What parts of the EC motor fan will need attention after long-term use?

The PBT blades and ABS housing resist deformation, so the only routine task is wiping dust off the blades and checking that the speed controller potentiometer turns smoothly; bearings are sealed in the EC motor and are not user-serviceable.

At what point does the 32 dB(A) noise level rise noticeably during continuous running?

The 32 dB(A) figure is measured at full speed under free-air conditions; restricting ducting, adding a carbon filter or running the stepless controller near maximum static pressure will increase audible turbulence before the motor itself gets louder.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.