Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Mid-tower E-ATX case, aluminium frame, tempered glass side panel, front USB Type-C port

BFKK

BFKK E-ATX Mid Tower Case ARGB 360mm USB 3.1 Gen-2 Type-C Tempered Glass

SKU CH-TMSY-S622Y

E-ATX mid-tower chassis with front-panel 360 mm water-cooling support, tempered-glass side panel, USB 3.1 Gen-2 Type-C and dual USB 3.0 ports, room for 375 mm graphics cards and 170 mm CPU coolers.

  • TypeE-ATX Mid Tower Chassis
  • Supports E-ATX boards for high-end builds
  • Front USB 3.1 Gen-2 Type-C for fast peripherals
  • Built-in ARGB controller with dedicated light key
  • Fits 360 mm radiators top and front for liquid cooling
  • Tool-free dust filters simplify cleaning and maintenance

E-ATX Mid-Tower Chassis

This mid-tower case accepts Mini-ITX, Micro-ATX, ATX, CEB and E-ATX motherboards. It features an aluminium draw-process exterior with a 4 mm tempered-glass left side panel. A built-in ARGB controller works with a motherboard 5 V ARGB header and dedicated lighting keys on the I/O panel.

Builders needing broad motherboard support

The case suits builders who want E-ATX compatibility, room for a 375 mm graphics card and a 170 mm CPU cooler, plus front-panel USB 3.1 Gen-2 Type-C and dual USB 3.0 ports. It is not for systems requiring more than two 3.5-inch drives or more than four 2.5-inch drives, nor for radiators thicker than 55 mm at the front.

Check motherboard form factor.

Verify that your motherboard is Mini-ITX, Micro-ATX, ATX, CEB or E-ATX. Confirm the graphics card is no longer than 375 mm and the CPU cooler no taller than 170 mm. Ensure the power supply fits within 180 mm depth and that front radiator thickness stays at or below 55 mm.

Priekšrocības

  • Supports E-ATX boards for high-end builds
  • Front USB 3.1 Gen-2 Type-C for fast peripherals
  • Built-in ARGB controller with dedicated light key
  • Fits 360 mm radiators top and front for liquid cooling
  • Tool-free dust filters simplify cleaning and maintenance

Specifikācijas

TypeE-ATX Mid Tower Chassis

Jautājumi par šo preci

What motherboard form factors does the E-ATX mid tower support?

The chassis accepts Mini-ITX, Micro-ATX, ATX, CEB and E-ATX boards, so you can use any of those sizes without modification.

Will a 360 mm radiator fit in the front if I keep my existing 3.5-inch hard drives?

Yes, the front panel supports a 360 mm radiator while the two 3.5-inch bays remain available; the 3.5-inch slots can also be converted to 2.5-inch SSD mounts if needed.

How can I confirm the ARGB lighting is working after I connect the 5 V header?

Press the dedicated light-control key on the I/O panel; the built-in controller will cycle the ARGB LEDs, showing the system is receiving the 5 V signal correctly.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.