Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small silver brass barb fitting with G1/4 thread and 3/8 tubing end

Bitspower

Bitspower BP-WTP-C02 G1/4" to 3/8" Barb Fitting Silver Shining

SKU CH-HWQ3-KXRT7 MPN BP-WTP-C02

Connects 3/8" ID soft tubing to G1/4" water-block threads with a hidden O-ring seal

  • TypeFittings
  • G1/4" thread connects to standard water-blocks
  • 3/8" barb secures soft tubing with 3/8" ID
  • Brass body resists corrosion in liquid loops
  • Hidden O-ring design seals without extra washers
  • Silver Shining finish matches silver-themed builds

G1/4" to 3/8" Barb Fitting

This Bitspower fitting connects soft tubing with a 3/8" inner diameter to components using a standard G1/4" thread. It is built from high-quality brass with a Silver Shining finish. The hidden O-ring design provides a secure seal inside the thread. This component is designed for custom water-cooling loops.

For 3/8" ID soft tubing builds

This fitting suits builders assembling a loop with 3/8" inner diameter tubing and G1/4" threaded ports. It is not for systems using hard tubing or tubing with a different inner diameter. Buyers needing a compression fitting instead of a barb should look at a different style. It also does not fit components with non-standard thread sizes.

5 mm thread length

The male G1/4" thread measures 5 mm in length, which determines how deep it seats into a waterblock or radiator port. Verify that your component's thread depth accommodates this measurement. The tubing side extends 15 mm for the barb connection. This specific dimension decides if the fitting clears obstacles or seats fully.

Priekšrocības

  • G1/4" thread connects to standard water-blocks
  • 3/8" barb secures soft tubing with 3/8" ID
  • Brass body resists corrosion in liquid loops
  • Hidden O-ring design seals without extra washers
  • Silver Shining finish matches silver-themed builds

Specifikācijas

TypeFittings

Jautājumi par šo preci

What tubing inner diameter must I already have for this G1/4" to 3/8" barb fitting?

You need soft tubing with a 3/8" inner diameter; the barb side is sized for that exact bore.

Will the 5 mm thread length engage properly in my existing G1/4" water-block ports?

Yes, the 5 mm G1/4" thread is the standard depth used by most water-blocks and radiators.

How can I confirm the hidden O-ring is sealing after I tighten the fitting?

Pressurise the loop and watch the joint — no coolant should appear at the thread or barb junction.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.