Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Straight brass tube, deep red finish, 16 mm OD, 500 mm long

Bitspower

Bitspower OD16mm Brass Hard Tubing Deep Red 500mm

SKU CH-P05M-4P95Z

Deep red brass tubing with a 16 mm outer diameter and 0.7 mm wall thickness, supplied in 500 mm lengths for custom liquid-cooling loops

  • TypeLiquid Cooling System
  • Brass construction resists corrosion for long loop life
  • 7 mm wall thickness adds rigidity and kink resistance
  • 16 mm outer diameter fits Bitspower OD16mm hard fittings
  • 500 mm length supplies ample tubing for custom routing
  • Deep Red finish gives a bold colour accent without dye

OD16mm Brass Hard Tubing

Bitspower OD16mm Brass Hard Tubing in Deep Red is a rigid tube for custom liquid-cooling loops. It suits builders who want a metallic finish and precise 16 mm outer diameter. The 500 mm length provides enough material for several bends in a typical desktop build. High-quality brass construction ensures durability and a consistent colour.

Fitting compatibility and preparation

The tube is designed for Bitspower OD16mm hard-fitting series and requires cutting to exact lengths before installation. Each cut end must be chamfered to prevent damage to O-rings and ensure a leak-free seal. A Bitspower metal tubing cutter is specified to avoid cracking the coloured coating during the cut. Double tube thickness adds structural rigidity for tight bend radii.

Capacity and headroom

The 0.7 mm wall thickness and brass material handle standard loop pressures without deformation. The 500 mm stick yields multiple segments, though complex layouts with many long runs may require additional sticks. RoHS compliance confirms restricted-substance limits are met. Builders needing longer continuous runs or a different outer diameter will need alternative tubing.

Priekšrocības

  • Brass construction resists corrosion for long loop life
  • 7 mm wall thickness adds rigidity and kink resistance
  • 16 mm outer diameter fits Bitspower OD16mm hard fittings
  • 500 mm length supplies ample tubing for custom routing
  • Deep Red finish gives a bold colour accent without dye

Specifikācijas

TypeLiquid Cooling System

Jautājumi par šo preci

Does the 0.7 mm wall thickness limit how tight a bend I can make without kinking?

The tubing has a 0.7 mm wall and 16 mm outer diameter; tighter bends need a proper mandrel or bending spring to avoid collapsing the thin brass wall.

Will the brass tubing add noticeable heat to my loop during all-day operation?

Brass conducts heat well, so the 500 mm length will reach coolant temperature quickly, but it does not generate heat itself.

Which fittings and cutter are required to install this 16 mm brass tube?

Use Bitspower OD16 mm hard fittings and the BP-CMMTC metal tubing cutter to cut and chamfer the tube without damaging the Deep Red finish.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.