NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Brute Networks
32 GB registered DDR4 server module at 2400 MT/s with CL15 latency and 1.2 V operation
Brute Networks supplies a 32GB DDR4-2400 registered DIMM built with major-brand chips. The module carries HP part number 809083-EF1 equivalence and is validated for 100% compatibility with systems requiring this specification. It installs directly into 288-pin slots to expand server capacity.
The module operates at DDR4 2400 (PC4 19200) with CL15 latency at 1.20V. Registered buffering and 2Rx4 organisation add error-correcting code support essential for stable multi-tasking workloads. This specific combination of speed, rank and voltage decides whether the part matches the server's qualified vendor list.
Brute Networks sources the same Samsung, SK Hynix or Micron components used by the original equipment manufacturer. Using this module maintains existing service contracts while costing less than OEM-labelled alternatives. Buyers who need a different capacity, speed grade or unbuffered UDIMM format cannot use this part.
| Brand | HP |
|---|---|
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
The module runs at DDR4-2400 with CAS latency 15, so each access cycle takes 15 clocks at that data rate; actual throughput depends on the platform memory controller and channel population.
The 288-pin registered DDR4 interface limits the module to DDR4-2400 speeds and requires a server board that supports registered ECC DIMMs; it will not work in unbuffered or consumer platforms.
It uses the standard 288-pin DDR4 RDIMM form factor with 2Rx4 organisation, so it fits any server DIMM slot wired for registered ECC modules; verify slot height and heater clearance in dense chassis.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?