Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board with black memory chips and gold edge connectors

Brute Networks

Brute Networks 32GB DDR4-2666 2Rx4 1.2V 288-Pin Registered ECC Server RAM

SKU CH-AKZD-27174

32GB DDR4-2666 registered ECC server memory module with 2Rx4 organisation, 1.2V operation and 288-pin form factor, validated for HPE 882448-001 compatibility

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2666 (PC4 21300)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32GB capacity supports large server workloads
  • DDR4-2666 speed delivers 21300 MT/s data rates
  • Registered ECC design improves data integrity
  • 20V operation reduces power consumption
  • 288-pin form factor fits standard DDR4 slots

32GB Registered ECC DDR4 Module

This 32GB DDR4-2666 registered ECC module is built for servers that require error-correcting memory and signal buffering. It suits administrators expanding capacity in compatible HPE platforms or maintaining existing infrastructure. The 2Rx4 organisation and 1.20V operation match the original specification for stable enterprise workloads. Buyers who need non-ECC or unbuffered memory for desktop boards cannot use this module.

Fits 288-Pin DDR4 Slots Requiring Registered DIMMs

Installation requires a server motherboard with 288-pin DDR4 slots that support registered ECC DIMMs and the PC4-21300 speed grade. The module draws 1.20V and presents a 2Rx4 load to the memory controller, freeing the builder from mixing ranks or voltages. Systems that only accept unbuffered or consumer SO-DIMM formats will not accept this part. Identical modules ship together so matched populations are simple to achieve.

Replaces HPE 882448-001 at Lower Cost

This module is the direct equivalent of HPE part 882448-001, using the same major-brand DRAM and validated for 100% compatibility. The upgrade is worthwhile when a server has free registered DIMM slots and the workload benefits from additional ECC capacity. If the platform has reached its maximum DIMM count or requires a higher data rate, this 2666 MT/s kit will not extend those limits.

Priekšrocības

  • 32GB capacity supports large server workloads
  • DDR4-2666 speed delivers 21300 MT/s data rates
  • Registered ECC design improves data integrity
  • 20V operation reduces power consumption
  • 288-pin form factor fits standard DDR4 slots

Specifikācijas

BrandHPE
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2666 (PC4 21300)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

Jautājumi par šo preci

What sustained-throughput ceiling does the DDR4-2666 rating impose on this 32 GB module?

The PC4-21300 designation means the module is rated for 21 300 MB/s maximum bandwidth, which is the first limit reached under continuous load.

How much heat and power does a 1.20 V registered DIMM add when the server runs 24/7?

At 1.20 V the module draws minimal power and produces little extra heat, while the registered buffer reduces electrical load on the memory controller.

Which server platforms already support 288-pin registered ECC DDR4 so this kit works without extra hardware?

Any system that accepts 288-pin DDR4 registered ECC memory — such as HPE servers using part 882448-001 — will recognise the module immediately.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.