Buffalo Technology
Buffalo Technology OP-HD12.0H2U-5Y 12 TB SATA NAS
12 TB SATA replacement drive for compatible Buffalo Terastation NAS systems
- TypeAccessory
- Dimensions1.06" x 4.17" x 6.81"
- Weight1.70 lbs.
- 12 TB capacity for large-scale NAS storage
- SATA 600 interface for fast data transfer
- Designed for Buffalo TS51210RH Terastation compatibility
- Compact 1.1" x 4.2" x 6.8" form factor fits drive bays
- 70 lb lightweight drive reduces system load
12 TB SATA Replacement Drive
This 12 TB SATA hard drive is designed as a direct replacement for specific Buffalo Terastation models. It uses a standard SATA 600 interface and fits the internal drive bays of the compatible units. The drive provides high-capacity storage for network-attached storage systems.
Suits TS51210RH owners; not for other systems
This drive is validated for the TS51210RH4804 and TS51210RH14412 Terastation units. Buyers with different NAS models or those needing a standalone external drive should look elsewhere. It is not a general-purpose internal drive for PCs or servers outside the listed compatibility.
12 TB capacity for array rebuilds
The 12 TB capacity matches the original drive specifications for the supported Terastation models. It comfortably handles full array rebuilds and bulk data storage within those systems. Headroom is defined by the fixed drive bay count of the host unit.
Priekšrocības
- 12 TB capacity for large-scale NAS storage
- SATA 600 interface for fast data transfer
- Designed for Buffalo TS51210RH Terastation compatibility
- Compact 1.1" x 4.2" x 6.8" form factor fits drive bays
- 70 lb lightweight drive reduces system load
Specifikācijas
| Brand | BUFFALO |
|---|---|
| Model | OP-HD12.0H2U-5Y |
| Type | Accessory |
| Dimensions | 1.06" x 4.17" x 6.81" |
| Weight | 1.70 lbs. |
| Sūtījuma svars | 0.91 kg |
| Sūtījuma izmēri | 229 × 152 × 102 mm |
Jautājumi par šo preci
Which NAS models does this 12 TB SATA drive officially support?
It is validated for the TS51210RH4804 and TS51210RH14412 Terastation systems.
Will the 1.1" high drive fit in a bay designed for 1.06" drives?
The 1.1" height is the installed dimension; the 1.06" figure is the bare drive. Both refer to the same physical unit and will occupy a standard 3.5" bay.
How can I confirm the drive is running at SATA 600 speed after installation?
Check the Terastation management console — it reports the negotiated link rate for each bay.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
