Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Purple Bykski rigid fitting for 12mm OD tubing

Bykski

Bykski B-HTJ-L12 12mm OD Rigid Fitting Purple

SKU CH-FXGM-GXAJS MPN B-HTJ-L12

Connects 12mm OD rigid tubing to G1/4 thread ports in custom cooling loops

  • TypeFittings
  • Secure G 1/4 thread connection for 12mm rigid tubing
  • Purple finish adds colour coordination to custom loops
  • Single fitting included for precise loop planning
  • Compatible with PETG, acrylic and metal 12mm OD tubing
  • Designed for DIY liquid-cooling builds

Compatible 12mm Rigid Tubing

This Bykski rigid fitting is designed for 12mm outside diameter tubing made from PETG, acrylic or metal. It provides a secure connection to any G 1/4 threaded port in a custom liquid-cooling loop. The purple finish adds a distinct colour accent to the build.

Builders Using 12mm Hard Tube

The fitting suits enthusiasts assembling a custom loop with 12mm OD rigid tubing who need a reliable G 1/4 connection. It is not intended for users working with soft tubing, smaller or larger diameter rigid tube, or thread standards other than G 1/4.

G 1/4 Thread Interface

The single specification that determines compatibility is the G 1/4 thread, which must match the port on the water block, radiator, reservoir or pump. The fitting accepts only 12mm outside diameter rigid tubing.

Priekšrocības

  • Secure G 1/4 thread connection for 12mm rigid tubing
  • Purple finish adds colour coordination to custom loops
  • Single fitting included for precise loop planning
  • Compatible with PETG, acrylic and metal 12mm OD tubing
  • Designed for DIY liquid-cooling builds

Specifikācijas

BrandBykski
TypeFittings

Jautājumi par šo preci

Will the G 1/4 thread on the 12mm OD fitting leak after the loop runs hot all day?

The compression design seals against 12mm rigid tubing and standard G 1/4 ports, so normal operating temperatures will not break the seal.

Do I need to buy 12mm rigid tubing separately for this fitting to work?

Yes, the fitting only accepts 12mm outside-diameter PETG, acrylic or metal tube, which must be purchased separately.

Can I mix this purple fitting with older nickel-plated G 1/4 blocks in the same loop?

The G 1/4 thread is universal, so it will screw into any standard port regardless of finish or age.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.