SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00497146BTC
Krājumā
Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3L 1600 CL11 SODIMM 1.35V memory upgrade
16 GB DDR3L SODIMM kit validated for Gigabyte Brix GB-BSi3H-6100 and GB-BSi5H-6200
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.35V
- 16 GB dual-channel kit boosts multitasking in Gigabyte Brix
- DDR3L 1600 MHz CL11 delivers responsive everyday performance
- Low 1.35 V operation reduces heat and power draw
- 204-pin SODIMM form factor fits the Brix GB-BSi3H-6100 and GB-BSi5H-6200
- Unbuffered non-ECC design ensures straightforward installation
Targeted upgrade kit
This 16GB kit provides two 8GB DDR3L SO-DIMM modules rated at 1600MHz with CL11 timing. It is built for owners of Gigabyte Brix GB-Bsi3H-6100 and GB-Bsi5H-6200 units who need the maximum supported memory. The 1.35V low-voltage design matches the platform requirement.
Compatibility focus
The kit suits users of the two listed Brix models wanting a simple, matched pair to fill both SO-DIMM slots. Builders working on any other laptop, mini PC or desktop board should verify their exact memory specification before buying. Systems requiring ECC or registered DIMMs cannot use these unbuffered sticks.
Deciding specification
The modules run at 1.35V DDR3L rather than standard 1.5V DDR3, so the voltage must be supported by the target hardware. If the host platform only accepts 1.5V memory, these sticks will not operate correctly. Confirm the board’s voltage tolerance before ordering.
Priekšrocības
- 16 GB dual-channel kit boosts multitasking in Gigabyte Brix
- DDR3L 1600 MHz CL11 delivers responsive everyday performance
- Low 1.35 V operation reduces heat and power draw
- 204-pin SODIMM form factor fits the Brix GB-BSi3H-6100 and GB-BSi5H-6200
- Unbuffered non-ECC design ensures straightforward installation
Specifikācijas
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246412800SODRL |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Gigabyte Brix GB-Bsi3H-6100, Brix GB-Bsi5H-6200 |
| Package Content | 2 Memory RAM Sticks |
Jautājumi par šo preci
Will this 1.35V DDR3L kit run stably in a Gigabyte Brix GB-Bsi5H-6200 that currently has 1600 MHz DDR3 installed?
Yes, the kit is DDR3L 1600 CL11 at 1.35V and is listed as compatible with the Brix GB-Bsi5H-6200; the system will operate the modules at the rated 1600 MHz speed.
How can I confirm both 8 GB sticks are recognised at 1600 MHz after installation?
Enter the BIOS or use a system-information tool; you should see 16 GB total, DDR3L-1600 (PC3L-12800) with 11-11-11 timings reported for each module.
Does the package include anything besides the two SODIMM sticks, such as a screwdriver or thermal pads?
The box contains only the two 204-pin DDR3L SODIMM modules; no tools, thermal pads or additional accessories are supplied.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
