Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four green 240-pin DDR3 DIMM sticks in a row

Computer Memory Solutions

Computer Memory Solutions CM10246412800DIMM 32GB (4x8GB) DDR3 1600MHz memory upgrade

SKU CH-4CD7-A7T42

A 32 GB DDR3-1600 kit of four 8 GB unbuffered DIMMs validated for HP Elite 8200 SFF, MT and CMT desktops

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 32 GB total capacity from four 8 GB modules
  • 1600 MHz DDR3 speed rated at PC3-12800
  • CL11 latency with 11-11-11 timing at 1.5 V
  • Guaranteed compatibility with HP Elite 8200 SFF/MT/CMT desktops
  • Unbuffered non-ECC 240-pin DIMM using major-brand chipsets

32GB DDR3 Kit for HP Elite 8200 Desktops

This four-module kit delivers 32GB of DDR3 memory at 1600MHz for HP Compaq Elite 8200 SFF, MT and CMT desktops. It uses unbuffered, non-ECC DIMMs rated at CL11 11-11-11 timings and 1.5V. The modules are validated for the listed Elite 8200 part numbers to ensure a trouble-free upgrade.

Steady throughput with standard voltage

Running at the JEDEC-standard 1.5V, the modules maintain their 1600MHz data rate during extended workloads without requiring elevated voltage. The CL11 latency stays consistent across the four ranks, so multi-threaded applications see predictable bandwidth rather than a brief burst followed by throttling.

Plain green PCB fits four slots

Each stick is a standard 240-pin DIMM without a heat spreader, keeping the profile low enough for the tight clearances inside SFF and MT chassis. Populating all four slots reaches the platform's 32GB maximum, leaving no room for additional modules. Buyers who want more capacity or ECC error correction must choose a different platform.

Priekšrocības

  • 32 GB total capacity from four 8 GB modules
  • 1600 MHz DDR3 speed rated at PC3-12800
  • CL11 latency with 11-11-11 timing at 1.5 V
  • Guaranteed compatibility with HP Elite 8200 SFF/MT/CMT desktops
  • Unbuffered non-ECC 240-pin DIMM using major-brand chipsets

Specifikācijas

BrandComputer Memory Solutions
ModelCM10246412800DIMM
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Elite 8200 Sff/Mt/Cmt Desktop
Package Content4 Memory RAM Sticks

Jautājumi par šo preci

How much heat and power will four 1.5 V DDR3 1600 CL11 modules add when the Elite 8200 runs all day?

Each stick runs at the standard 1.5 V for DDR3 1600 with CL11 timing, so total draw is what four unbuffered DIMMs at that voltage normally consume.

Does the Elite 8200 need four free 240-pin DIMM slots to install this 32 GB kit?

Yes, the kit contains four 8 GB modules and the system supports a maximum of four sockets, so all four slots must be available.

Will these DDR3 1600 CL11 sticks work in the Elite 8200 if I keep some original memory installed?

The kit is guaranteed compatible with the Elite 8200 SFF/MT/CMT; mixing speeds will force the system to run all modules at the slowest installed speed.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.