SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00502107BTC
Krājumā
Computer Memory Solutions
Computer Memory Solutions CM2048722133ECCREG 32GB DDR4 2133MHz ECC Registered DIMM memory upgrade
32 GB DDR4 ECC registered dual-rank kit for HP ProLiant DL60 Gen9 servers
- Capacity32GB (16 x 2GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Timing15-15-15
- Voltage1.2V
- 32 GB total capacity across two 16 GB modules
- ECC registered design detects and corrects single-bit errors
- 2133 MHz DDR4 speed with CL15 latency timing
- 2 V operation reduces server power draw
- Validated for HP ProLiant DL60 Gen9 systems
Server-specific ECC memory kit
This 32 GB kit contains two 16 GB DDR4-2133 registered DIMMs built for the HP ProLiant DL60 Gen9. Each module runs at 1.2 V with CL15 timing and provides error-correcting code protection for data integrity. The 288-pin form factor matches the server’s memory slots exactly.
For single-socket DL60 Gen9 upgrades
The kit suits administrators adding capacity to a single-processor DL60 Gen9 where eight DIMM slots are available. It is not for systems that require load-reduced DIMMs, for builds mixing registered and load-reduced modules, or for any platform outside the validated ProLiant Gen9 family.
Fills two of eight registered DIMM slots
Installing this pair occupies two sockets and leaves room for further registered ECC expansion up to the platform’s 256 GB registered limit. The modules automatically clock down to the optimal speed supported by the installed processor. No heat-spreader requirement is specified for this server chassis.
Priekšrocības
- 32 GB total capacity across two 16 GB modules
- ECC registered design detects and corrects single-bit errors
- 2133 MHz DDR4 speed with CL15 latency timing
- 2 V operation reduces server power draw
- Validated for HP ProLiant DL60 Gen9 systems
Specifikācijas
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2048722133ECCREG |
| Capacity | 32GB (16 x 2GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Timing | 15-15-15 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | HP/Compaq ProLiant DL60 Gen9 (G9) |
| Package Content | 2 Memory RAM Sticks |
Jautājumi par šo preci
Does my ProLiant DL60 Gen9 need both processors installed to use all 16 DIMM slots for this 32 GB kit?
With one processor only eight DIMM slots are available; installing a second CPU unlocks the full sixteen slots so the two 16 GB modules can be placed in any supported configuration.
Will these registered ECC DIMMs work if I keep my existing load-reduced DIMMs in the same server?
Mixing registered and load-reduced DIMMs is not supported in the ProLiant DL60 Gen9, so all modules must be the same type for the system to operate correctly.
How can I confirm the kit is running at DDR4-2133 CL15 after installation?
Check the system BIOS or iLO memory information screen — it will show each module at 2133 MT/s with 15-15-15 timings and 1.2 V when the kit is operating as specified.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
