Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green 240-pin DDR3 DIMM modules without heat spreaders

Computer Memory Solutions

Computer Memory Solutions CM2566410600DIMM1R8 4GB (2x2GB) DDR3 1333MHz CL9 memory upgrade

SKU CH-2JQ4-5F802

Two 2 GB DDR3-1333 CL9 DIMMs totalling 4 GB, validated for the HP Compaq 8100 Elite SFF desktop

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 4 GB total capacity for smoother multitasking
  • Dual-channel 2 × 2 GB kit for balanced bandwidth
  • DDR3 1333 MHz CL9 timing for responsive performance
  • Unbuffered non-ECC 240-pin DIMMs install without extra config
  • Guaranteed compatible with HP Compaq 8100 Elite SFF

HP Compaq 8100 Elite SFF upgrade

This 4GB kit contains two 2GB DDR3 modules built for the HP Compaq 8100 Elite Small Form Factor Business PC. It is for owners of that system who need a matched pair to restore or expand memory. It is not for builders using other motherboards or anyone needing ECC or registered memory.

DDR3 1333MHz interface limits

The modules run at 1333MHz (PC3-10600) with CL9 timing at 1.5V on a 240-pin DIMM interface. This is the native speed ceiling for this DDR3 standard; the memory will not exceed it. The platform caps usable memory at 3.5GB with a 32-bit OS regardless of installed capacity.

4GB kit capacity and headroom

The kit provides 4GB total across two sticks. A 64-bit operating system is required to address the full amount and to reach the platform maximum of 16GB. With a 32-bit OS the system recognises only 3.5GB or less depending on configuration.

Priekšrocības

  • 4 GB total capacity for smoother multitasking
  • Dual-channel 2 × 2 GB kit for balanced bandwidth
  • DDR3 1333 MHz CL9 timing for responsive performance
  • Unbuffered non-ECC 240-pin DIMMs install without extra config
  • Guaranteed compatible with HP Compaq 8100 Elite SFF

Specifikācijas

BrandComputer Memory Solutions
ModelCM2566410600DIMM1R8
Capacity4GB (2 x 2GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Compaq 8100 Elite Small Form Factor Business Pc
Package Content2 Memory RAM Sticks

Jautājumi par šo preci

Should I choose the 2x2GB kit or look for a single 4GB module for my HP Compaq 8100 Elite SFF?

The 2x2GB kit enables dual-channel operation on the 8100 Elite SFF, which typically improves memory bandwidth compared to a single 4GB stick.

What does the PC3 10600 rating actually deliver in this system?

PC3 10600 means the modules run at 1333 MHz with CL9 timing at 1.5V, providing the standard DDR3 bandwidth the 8100 Elite SFF expects.

Will these 240-pin DDR3 DIMMs work in the 8100 Elite Small Form Factor without issues?

Yes, they are 240-pin unbuffered non-ECC DDR3 DIMMs validated for the HP Compaq 8100 Elite SFF, matching the required 1.5V voltage and CL9 latency.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.