Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with black memory chips and gold edge connectors

Computer Memory Solutions

Computer Memory Solutions CM512642400DIMM 4GB DDR4 2400 CL17 1.2V 288-pin DIMM memory upgrade

SKU CH-DNZK-3W753

4 GB DDR4 module running at 2400 MHz with CL17 timing and 1.2 V operation for listed ASRock boards

  • Capacity4GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 4GB capacity adds responsive multitasking headroom
  • DDR4 2400 speed matches PC4-19200 bandwidth
  • CL17 17-17-17 timing keeps latency low
  • 2V unbuffered design runs cool and stable
  • Validated for ASRock A320M, B250, B350, B450 Pro4 boards

4GB DDR4-2400 DIMM for ASRock boards

This 288-pin unbuffered module delivers 4GB at 2400 MHz with CL17 timing and 1.2V operation. It is validated for ASRock A320M Pro4, AB350 Pro4, AB350M Pro4, B250 Pro4, B250M Pro4, B450 Pro4 and B450M Pro4 motherboards. The single-rank 2Rx8 configuration suits standard desktop upgrades.

Sustained load behaviour

JEDEC-standard DDR4-2400 operation keeps voltage at 1.2V during extended sessions, so thermal output remains modest without a heat spreader. CL17 latency is held consistently across the 17-17-17 timing set, avoiding throttling that can appear on tighter-tuned kits under prolonged writes. Unbuffered design adds negligible signal delay.

Pre-order checklist

Confirm your board is one of the listed ASRock models and that a free 288-pin DDR4 slot exists. The platform supports up to 64GB across four sockets, so total capacity after installation must not exceed that limit. Non-ECC unbuffered memory is required; registered or ECC modules will not function. Mixing with faster DDR4 kits will downclock all sticks to 2400 MHz.

Priekšrocības

  • 4GB capacity adds responsive multitasking headroom
  • DDR4 2400 speed matches PC4-19200 bandwidth
  • CL17 17-17-17 timing keeps latency low
  • 2V unbuffered design runs cool and stable
  • Validated for ASRock A320M, B250, B350, B450 Pro4 boards

Specifikācijas

BrandComputer Memory Solutions
ModelCM512642400DIMM
Capacity4GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemASRock A320M Pro4, AB350 Pro4, AB350M Pro4, B250 Pro4, B250M Pro4, B450 Pro4, B450M Pro4 Motherboards
Package Content1Memory Ram Stick

Jautājumi par šo preci

How much power does the CM512642400DIMM draw when running continuously?

The module operates at 1.2V, which is the standard DDR4 voltage, keeping power draw low during all-day use.

What motherboard slot is required for this 288-pin DDR4 stick?

A standard DDR4 DIMM slot on one of the listed ASRock boards such as the A320M Pro4, B250 Pro4 or B450M Pro4.

Can I add this 4 GB stick to existing DDR4 memory on a compatible ASRock board?

Yes, it is unbuffered non-ECC DDR4-2400 CL17 and will work alongside other DDR4 modules up to the board's 64 GB limit.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.