Corn Electronics Jonsbo MOD3 Open Frame ATX Mid Tower Purple PC Case
- ATX Mid Tower
- Purple
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Corn Electronics
Open-frame ATX mid-tower with aluminium-magnesium structure, 4 mm tempered glass side panel, 49 mm rear cable space, front 5V ARGB lighting, supports E-ATX boards, 400 mm GPU, 360 mm top radiator.
The Corn Electronics MOD3 is an open-design ATX mid-tower finished in purple aluminium-magnesium alloy with a 4.0mm tempered-glass side panel. It targets enthusiasts who want their high-end hardware on display while supporting custom liquid-cooling loops. The chassis fits Micro-ATX, ATX and E-ATX motherboards and includes a 5V ARGB mecha lighting strip on the front panel.
Confirm your board is no larger than E-ATX and that your graphics card does not exceed 400mm. The power-supply bay accepts units up to 195mm long, so measure your PSU against that limit. CPU coolers must stay within 170mm of height. Radiator support tops out at 360mm on the roof, and the case ships without a power supply.
The structure uses 2.5mm and 2.0mm aluminium-magnesium alloy panels for rigidity, while the 4.0mm glass side panel gives a clear view of the interior. A 49mm deep cable-management space behind the motherboard tray keeps routing tidy. Dust filters are fitted, and drive mounts provide one 3.5-inch bay plus two 2.5-inch bays. Seven expansion slots accommodate full-length cards.
| Brand | Jonsbo |
|---|---|
| Series | MOD3 |
| Type | ATX Mid Tower |
| Color | Purple |
| With Power Supply | No |
| Motherboard Compatibility | Micro ATX / ATX / E-ATX |
| Dust Filters | Yes |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 7 |
| Fan Options | Front - 3 x 120mm / Top - 2 x 120mm / Top - 3 x 120mm |
| Radiator Options | Top - Up to 360mm |
| Max GPU Length | 400 mm |
| Max CPU Cooler Height | 170 mm |
| Max PSU Length | 195 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
No power supply is included. You must provide an ATX PSU up to 195 mm long, a motherboard (Micro ATX, ATX or E-ATX), a CPU cooler no taller than 170 mm, and a graphics card up to 400 mm. The case supplies one 3.5" bay, two 2.5" bays, dust filters, 49 mm rear cable routing space, and a 4.0 mm tempered glass side panel.
The top supports up to 360 mm. Choose 360 mm if your motherboard and RAM clearance allow three 120 mm fans; otherwise a 240 mm radiator with two 120 mm fans fits more builds while still delivering strong cooling.
Any card measuring 400 mm or less will fit. Measure your card including the power connector; if it exceeds 400 mm it will not install in this chassis.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?