Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two black DDR4 memory sticks with RGB light bars on top

Corsair

Corsair CMH32GX4M2D3600C18 Vengeance RGB Pro SL 32GB DDR4 desktop RAM

SKU CH-TC9P-ER3YH MPN CMH32GX4M2D3600C18

32 GB dual-channel DDR4 kit at 3600 MHz CL18 with ten addressable RGB LEDs per module and a 44 mm low-profile heat-spreader for broad cooler clearance

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3600 (PC4 28800)
  • CAS LatencyCL18
  • Timing18-22-22-42
  • Voltage1.35V

Capacity 32GB (2 x 16GB)

Speed DDR4 3600 (PC4 28800)

CAS Latency CL18

Color Black

  • 32 GB dual-channel kit enables high-capacity multitasking
  • 3600 MHz DDR4 speed with CL18 latency for responsive performance
  • 44 mm low profile fits large air coolers
  • Ten addressable RGB LEDs per module controlled via iCUE software
  • 35 V Intel XMP 2.0 profile simplifies stable overclocking

32GB DDR4 kit for RGB builds

This kit provides 32GB of DDR4 memory across two 16GB modules rated at 3600 MT/s with CL18 timings. It targets enthusiasts who want high-speed capacity and per-LED lighting control in a single package.

44mm height clears large air coolers

The low-profile heat spreader measures 44mm tall, leaving room for bulky tower coolers such as the CORSAIR A500. Intel XMP 2.0 support lets the firmware apply the rated 18-22-22-42 timings at 1.35V without manual tuning.

Screened chips sustain stability when overclocked

Tightly screened ICs and a custom performance PCB maintain signal quality during extended heavy workloads. The anodized aluminum spreader conducts heat away from the modules so frequencies and latencies remain consistent over long sessions.

Priekšrocības

  • 32 GB dual-channel kit enables high-capacity multitasking
  • 3600 MHz DDR4 speed with CL18 latency for responsive performance
  • 44 mm low profile fits large air coolers
  • Ten addressable RGB LEDs per module controlled via iCUE software
  • 35 V Intel XMP 2.0 profile simplifies stable overclocking

Specifikācijas

BrandCORSAIR
SeriesVengeance RGB Pro SL
ModelCMH32GX4M2D3600C18
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR4 3600 (PC4 28800)
CAS LatencyCL18
Timing18-22-22-42
Voltage1.35V
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderAnodized Aluminum
FeaturesIlluminate your system with vivid, animated lighting from ten individually addressable, ultra-bright RGB LEDs per module.
Choose from dozens of preset lighting profiles, or create your own in CORSAIR iCUE software.
Just 44mm tall for wide compatibility with air coolers such as the CORSAIR A500.
Optimized for maximum bandwidth and tight response times on the latest Intel and AMD DDR4 motherboards.
A custom performance PCB provides the highest signal quality for the greatest level of performance and stability.
VENGEANCE RGB PRO SL modules use only tightly screened memory chips, for ext
Recommend UseAMD & Intel Compatible / AMD 400 Series / AMD 500 Series / AMD X570 / Intel 400 Series / Intel 500 Series / Intel 600 Series
LED ColorRGB
Sūtījuma svars0.15 kg
Sūtījuma izmēri162 × 132 × 11 mm

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What height limit does the 44 mm module height hit first under sustained use?

The 44 mm height clears most air coolers including the Corsair A500, so the first limit is usually motherboard slot spacing or case side-panel clearance rather than cooler interference.

How much heat and power does the 1.35 V kit produce when running all day?

At 1.35 V the modules draw standard DDR4 power; the anodized aluminum heat spreader dissipates heat effectively during continuous operation with no active cooling required.

Which motherboard feature must already be present for the Intel XMP 2.0 profile to work?

A motherboard with an Intel 400, 500 or 600 series chipset that supports Intel XMP 2.0 is needed to load the 3600 MT/s CL18 profile automatically.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.