Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two black 140mm PWM case fans with center RGB LEDs and magnetic levitation bearings, plus Lighting Node PRO controller

Corsair

Corsair ML140 PRO RGB 140mm case fan 2-pack CO-9050078-WW

SKU CH-MS6X-KXQ1V MPN CO-9050078-WW

Two 140 mm magnetic-levitation fans with RGB lighting and a Lighting Node PRO controller, adjustable from 400 to 1200 RPM for 55.4 CFM at 20.4 dBA

  • Fan Counts2 Fans
  • Fan ControllerController
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size140mm
  • Fan Thickness25mm

LED RGB

Model ML140 PRO RGB

Option Dual Fans with Controller

  • Magnetic levitation bearing cuts friction for quieter 20.4 dBA operation
  • Four independent RGB LEDs per fan deliver vivid centre-mounted lighting
  • Included Lighting Node PRO syncs effects across CORSAIR LINK devices
  • PWM control spans 400 to 1200 RPM for silent or high-airflow modes
  • Two 140 mm fans move 55.4 CFM each at 25 mm thickness

Two 140 mm fans for RGB builds

This pack supplies two 140 mm case fans that use magnetic levitation bearings to reduce friction and noise. They suit builders who want coordinated lighting and low acoustic output in a standard chassis. The 4-pin PWM connectors allow motherboard speed control from 400 to 1200 RPM with a tolerance of plus or minus 10 percent. Each fan delivers 55.4 CFM at a rated 20.4 dBA.

Lighting Node PRO and RGB hub included

The bundle adds a Lighting Node PRO controller and an RGB hub so both fans can be addressed through Corsair iCUE software without extra purchases. Four centre-mounted LEDs per fan provide per-LED colour control for synchronised effects across the system. Mounting strips and eight screws are also supplied for quick installation. The controller connects via internal USB and requires a free header on the motherboard.

PWM speed range and single 4-pin header per fan

Speed is limited to the 400 to 1200 RPM band, so the fans cannot spin slower for silent idle or faster for extreme static pressure. Each unit draws power and reports tach data through its own 4-pin connector, occupying two headers or a splitter. The magnetic bearing design reduces wear but does not eliminate airflow restriction from dense radiator fins or dust filters. Buyers needing variable-speed control outside this range or 3-pin voltage regulation should look elsewhere.

Priekšrocības

  • Magnetic levitation bearing cuts friction for quieter 20.4 dBA operation
  • Four independent RGB LEDs per fan deliver vivid centre-mounted lighting
  • Included Lighting Node PRO syncs effects across CORSAIR LINK devices
  • PWM control spans 400 to 1200 RPM for silent or high-airflow modes
  • Two 140 mm fans move 55.4 CFM each at 25 mm thickness

Specifikācijas

BrandCorsair
SeriesML140 PRO RGB
ModelCO-9050078-WW
Fan Counts2 Fans
Fan ControllerController
TypeCase Fan
CompatibilityCase
Fan Size140mm
Fan Thickness25mm
Bearing TypeMagnetic Levitation Bearing
RPM400 - 1200 RPM +/- 10%
Air Flow55.4 CFM
Noise Level20.4 dBA
Power Connector4 Pin
ColorBlack
LEDRGB
FeaturesMagnetic Levitation Bearing: Dramatically reduces bearing friction by magnetically levitating the fan blade, producing lower noise and higher performance.
Dynamic RGB Lighting: Four independent ultra-bright center-mounted RGB LEDs output a vivid blast of light and color.
Control, Customize and Sync: The included CORSAIR Lighting Node PRO enables stunning dynamic lighting effects with other CORSAIR LINK supported devices.
Complete PWM Control: Dynamically control fan speed from 400 RPM to 1,200 RPM to minimize noise or maximize airflow.
Built to Last: Long lifespan with a five-year wa
Dimensions140.00 x 140.00 x 25.00 mm x 2pcs
Package Contents2 x Fans
1 x RGB Lighting Hub
1 x CORSAIR Lighting Node PRO
8 x Fan Mounting Screws
2 x Mounting Strips for Lighting Node PRO
Sūtījuma svars0.15 kg
Sūtījuma izmēri185 × 157 × 89 mm

Citas šī modeļa versijas

Vēl 4 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the magnetic levitation bearing need lubrication or replacement after long use?

The magnetic levitation bearing has no physical contact, so there is no lubrication to add and no wear surface to replace under normal operation.

At 1,200 RPM what is the airflow ceiling before the fan hits its speed limit?

Maximum airflow is 55.4 CFM at the 1,200 RPM ceiling; the fan cannot exceed that speed or airflow figure.

How loud and how much heat does the pair generate when running at full PWM all day?

Each fan reaches 20.4 dBA at 1,200 RPM; two fans together stay at that level, and the 4-pin PWM connector draws only the power needed for the rated speed.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.