Crucial CT51264BF186DJ 4GB DDR3L 1866 laptop RAM
- 4GB
- 204-Pin DDR3 SO-DIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Crucial
8GB DDR3L 1866 CL13 1.35V SO-DIMM upgrades laptop memory with low-voltage efficiency
Capacity 8GB
This 204-pin module delivers 8GB of DDR3L memory at 1866 MT/s with CL13 latency. It operates at the standard 1.35V low voltage and is also rated for 1.5V compatibility. The unbuffered, non-ECC design matches the requirements of most mainstream notebook platforms.
This module suits owners of laptops that accept DDR3L SO-DIMMs running at PC3L-14900 speeds. It will not fit systems that require registered or ECC memory. Buyers whose machines only support earlier DDR3 speeds or different form factors should verify their manual before ordering.
The decisive specification is the DDR3L 1866 MT/s rating with CL13 timing at 1.35V. This combination determines whether the module matches the memory controller and slot voltage of the target laptop. Confirm that the system specifies PC3L-14900 or compatible DDR3L operation to ensure correct function.
| Brand | Crucial |
|---|---|
| Model | CT102464BF186D |
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Sūtījuma svars | 0.05 kg |
| Sūtījuma izmēri | 155 × 119 × 10 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes, the 204-pin DDR3L SO-DIMM is the standard form factor for laptop DDR3 and DDR3L slots.
Align the notch on the module with the key in the slot, insert the module at an angle until the connector is fully seated, then press down until the side clips click into place.
The module supports both 1.35V and 1.5V operation; the system automatically selects the correct voltage at boot.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?