DARKROCK Classico Storage Master PC Case ATX Mid Tower 13 Drive 4x120mm Fans USB 3.0 360mm Radiator Vertical
- ATX / Micro ATX Mid…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
DARKROCK
E-ATX full-tower case holds up to 13 drives (10 x 3.5" and 3 x 2.5") with vertical GPU mounting, top 360 mm radiator support and mesh-panel airflow
Options Classico Max
The DARKROCK Classico Max is a full-tower case built around massive drive support. It provides ten internal 3.5-inch bays and three 2.5-inch bays for a total of thirteen drives. The chassis accepts E-ATX, ATX, micro-ATX and mini-ITX motherboards, though E-ATX installation requires removing the drive cages. Four 120 mm fans are included and a tempered glass side panel shows the interior.
This case suits builders who need a single chassis to hold a large mechanical storage array. It also fits users wanting vertical GPU mounting via three dedicated slots with parallel front-to-rear airflow. It is less suited for compact builds or for anyone who must keep all drive cages installed while using an E-ATX board, since the cages block that form factor.
The top panel supports a radiator up to 360 mm long, setting the limit for the largest all-in-one liquid cooler you can install. The rear accommodates a 120 mm radiator. Fan mounts accept 120 mm and 140 mm units in several locations, plus a single 40 mm position, but the 360 mm top clearance is the decisive figure for high-wattage cooling plans.
| Brand | DARKROCK |
|---|---|
| Series | DARKROCK Storage Master Series |
| Model | CLASSICO MAX |
| Part Number | CC-9011268-WW |
| Type | E-ATX Full Tower Case |
| Color | Black |
| Case Material | Metal & Plastic |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | E-ATX/ ATX / M-ATX / Mini-ITX |
| Side Panel | 1 x Side Tempered Glass Panel |
| Dust Filters | Top & Bottom |
| Internal 3.5" Drive Bays | 10 |
| Internal 2.5" Drive Bays | 3 |
| Expansion Slots | 7 |
| Front Ports | USB |
| Fan Options | Top & Front - 3 x 120mm, Rear - 1 x 120mm |
| Radiator Options | Top - Up to 360mm, Rear - Up to 120mm |
| 40mm Fans | 1 |
| 120mm Fans | 7 |
| 140mm Fans | 5 |
| 180mm Fans | 4 |
| 200mm Fans | 1 |
| 220mm Fans | 1 |
| 250mm Fans | 1 |
| Max GPU Length | 400 mm |
| Max CPU Cooler Height | 180 mm |
| Max PSU Length | 200 mm |
| Dimensions | 18.78" x 9.06" x 18.3" |
| Package Content | Classico MAX |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
No, the hard drive cages must be removed to install an E-ATX motherboard. ATX, M-ATX and Mini-ITX boards fit with the cages in place.
The case supports up to 13 drives: ten 3.5-inch bays and three 2.5-inch bays.
Yes, the top panel accepts radiators up to 360 mm, and the rear supports up to 120 mm.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?