Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 3.5 inch hard drive with SAS connector and Dell label

DELL

DELL 04G9M 4 TB 3.5" SAS 7200 RPM internal hard drive

SKU CH-CW88-AVV2E

A 4 TB 3.5 inch SAS hard drive spinning at 7200 RPM for nearline storage

  • InterfaceSAS 6Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • Form Factor3.5"
  • High capacity for bulk storage with 4 TB
  • Fast sequential access from 7200 RPM spindle
  • Reliable enterprise connection via SAS 6Gb/s
  • Fits standard bays with 3.5 inch form factor
  • Nearline design balances cost and endurance

4 TB Nearline SAS Drive

The Dell 04G9M is a 4 TB 3.5 inch nearline SAS hard drive spinning at 7200 RPM with a 6 Gb/s interface. It is built for desktop and server bays that accept 3.5 inch SAS drives and need high-capacity bulk storage. The drive arrives new in original or OEM packaging.

Suits SAS-only storage arrays

This drive fits systems equipped with a SAS controller or backplane that can address 6 Gb/s nearline drives. Buyers whose hardware lacks a SAS host bus adapter or whose drive bays are limited to 2.5 inch form factors cannot install this unit. It is also unsuitable for workloads that demand solid-state latency or higher spindle speeds.

6 Gb/s SAS interface decides fit

The single specification that determines compatibility is the 6 Gb/s SAS interface; the system must provide a matching SAS port and 3.5 inch bay. Without that interface the drive will not be recognised, regardless of its 4 TB capacity or 7200 RPM speed.

Priekšrocības

  • High capacity for bulk storage with 4 TB
  • Fast sequential access from 7200 RPM spindle
  • Reliable enterprise connection via SAS 6Gb/s
  • Fits standard bays with 3.5 inch form factor
  • Nearline design balances cost and endurance

Specifikācijas

BrandDell
Model04G9M
InterfaceSAS 6Gb/s
Capacity4TB
RPM7200 RPM
Form Factor3.5"

Jautājumi par šo preci

How do I install the 04G9M in a 3.5" SAS bay and which step is often missed?

Slide the drive into the 3.5" bay, secure it with screws or the carrier latch, then connect both the SAS data cable and the power cable; the step most often missed is attaching the power connector.

What maintenance or replacement will the 4 TB Nearline SAS drive need later?

As a mechanical 7200 RPM hard drive, it has no user-serviceable parts; plan to replace the unit once SMART attributes show reallocated sectors or the drive exceeds its rated workload.

What limit appears first on the 04G9M during sustained 6 Gb/s SAS transfers?

The 7200 RPM platters cap sustained throughput well below the 6 Gb/s interface ceiling, so mechanical media speed becomes the bottleneck first.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.